Use and Care Manual

11
OVEN CONTROLS
Setting Bake
The bake key controls normal baking. If rapid preheating is
preferred, refer to the Preheat feature for instructions. The
oven can be programmed to bake at any temperature from
170°F to 550°F.
Baking Tips:
• Preheat your oven before using the bake mode.
• During preheat, the 3 elements and the convection fan
are used in cycle to quickly heat the oven.
• Use only one rack and center the pans as much as
possible on rack 2 or 3.
• If using two racks, place the oven racks in positions 2
and 4.
• Allow 2” to 4” (5,1 to 10,2cm) around the utensil(s) for
proper air circulation.
• Be sure the pans do not touch each other, the door,
sides or back of the oven.
To set the Bake Temperature to 375°F:
1. Arrange interior oven racks.
2. Press bake, 350 will appear in the display.
3. Press 3 7 5.
4. Press start. The actual temperature will be displayed. A
beep will sound once the oven temperature reaches
375°F and the display will show 375°.
5. Place food in the oven.
To change the bake temperature (example: changing
from 375°F to 425°F):
1. After the oven has already been set to bake at 375°F
and the oven temperature needs to be changed to
425°F, press bake and 375 will appear in the display.
2. Press 4 2 5. BAKE will continue to flash and 425° will
appear in the display.
3. Press start. The actual temperature will be displayed.
Setting Preheat
The preheat keys control the PowerPlus™ preheat/
Quick preheat features. Use this feature when recipes call
for preheating. The oven can be programmed to preheat at
any temperature between 170°F to 550°F.
To set the preheat temperature for 375°F:
1. Arrange the interior oven racks.
2. Press preheat. 350 will appear in the display. If a
preheat of 350°F is needed, press start.
3. Press 3 7 5.
4. Press start. PREHEAT will be displayed while the oven
is preheating along with the set temperature.
5. Press off when baking is complete or to turn off the
preheat feature.
To change preheat temperature while oven is
preheating (ex: changing from 375°F to 425°F):
If it is necessary to change the preheat temperature while
the oven is preheating to the original temperature:
1. While preheating, press preheat. 375 will appear in the
display.
2. Enter the new preheat temperature. Press 4 2 5.
3. Press start. PREHEAT will appear in the display.
Note: A beep will sound once the oven temperature
reaches 425°F and the display will show 425°.
When baking is complete press off.
Figure 3: Pan spacing and rack positions
Pressing off will stop the feature at any time.
During the first rise of temperature, the convection fan will
activate to allow the oven to reach its target temperature
faster.
1
2
3
5
4
NOTE
After the oven has reached the desired temperature (this
example, 375°F) the control will beep and the PREHEAT
light will turn off, the bake feature will activate and oven
target temperature will be displayed. The preheat
temperature can only be changed while the PREHEAT
message is displayed.
NOTE