Brochure (2020)

NOTE: Chassis requires WSE sleeve (sold and shipped separately)
OPTIONAL ACCESSORIES
IMPORTANT:
Operating the air conditioner
with incor rect rear gr ille or
without Baffl e Adapter Kit
(on 19 ¾" deep sleeve) will
recirculate discharge air and
cause compressor overload
to trip.
This will cause the unit to shut
down temporarily and may
lead to premature compressor
failure.
CORRECT Vertical Louvers
INCORRECT Horizontal Louvers
WSE SLEEVE/ EXTERIOR GRILLES
Optional Architectural Grille- AG
Premium extr uded aluminum grille.
Standard Grille
Premium, expanded metal grille
with powder coat paint. Ships
with WSE sleeve.
INSTALLATION ACCESSORIES
DK / Dr ain Kit
Installed at the back of the unit and allows for
attachment to condensate disposal system,
if necessary or desired.
IDK / Inter nal Drain Kit
New constr uction applications
where a condensate drain system
has been built into the wall interior.
BAK / Baffl e Adapter Kit
Necessar y when installing in a
sleeve deeper than 16 ¾" deep,
such as Fedders B sleeve
(19 ¾" deep).
Hei gh t Wid th Dept h
Height
of Front
Widt h of
Fr ont
Depth
with
Fr ont
Minimum
Ext ension Into
Room with
Fr ont
15 ¾" 26 ½" 21" 17 ¼" 27 ½" 23 ¼" 7 ½"
CHASSIS DIMENSIONS WSE SLEEVE DIMENSIONS
Hei ght Wid t h Dept h
Depth
with
Fr ont
Minimum
Extension
Outside
Thr u-the-wall
Finished Hol e
Height Width Max. Depth
16 ¾" 27" 16 ¾" 24 ¼"
9
/ 16 " 17 ¼" 27 ¼" 15
5
/ 16 "
WSE Wall Sleeve
Ships with standard gr ille (shown
above) and standard galvanized
steel inner panel and painted steel
outer panel.
WSE sleeve Steel inner panel Outer weather panel
*Installation in Fedders B sleeve requires a baffl e adapter kit- BAK.
Dimensions
Friedr ich
WSE Sleeve
Fedder s
A Sleeve
Fedder s
B Sleeve*
Height (inches) 16¾” 16 ¾” 16¾”
Width (inches) 27” 27” 27”
Depth (inches) 16¾” 16 ¾” 19 ¾”
A PERFECT FIT IN FEDDERS A & B
*
27" SLEEVES
Replace old, ineffi cient 27” sleeve units with WallMaster