USC Sleeve Detailed Overview

THRU-THE-WALL OPTIONAL ACCESSORIES
Model Height W id th Depth
Depth
with
Front
Minimum
Extension
Into Room
Minimum
Exten-
sion
Outside
Thru-the-wall
Finished Hole
Height Width Max. Depth
WallMaster
®
WSE Sleeve 16 3/4" 27" 16 3/4" 23" 7 1/2" 9/16" 17 1/4" 27 1/4" 15 5/16"
Chassis 15 3/4" 26 1/2" 21" 22” – – – – –
Uni-Fit
®
USC Sleeve 15 1/2" 25 7/8" 16 3/4" 20 1/2" – 1/2" 15 3/4" 26 1/8" 16 1/4"
US Chassis 14 3/8" 24" 18 1/2” 20 1/8" 3 3/4" – – – –
UE Chassis 14 3/8" 24 5/8" 18” 19 5/8" 3 1/2" – – – –
Sleeve/Chassis Dimensions
IMPORTANT:
US chassis w/front fully installed into USC sleeve extends
into room 3
3
/8”. UE chassis w/front fully installed into
USC sleeve extends into room 2
7
/8”. 1” gap on sides and
1
/2” gap at top can be covered by two-piece trim ring that
ts over the chassis front
STANDARD GRILLE – Ships with USC sleeve
Expanded aluminum grille designed for use with USC sleeve.
REPLACEMENT GRILLE – Ships with US/UE chassis
Black plastic for use on existing sleeves without any grille.
IMPORTANT:
When installing into an existing sleeve, consult Installation
Section of your Installation/Operation Manual to determine
whether or not the grille needs to be replaced and/or a bafe
adapter should be used.
Uni-Fit
®
26” Sleeve Exterior Grilles
Optional Architectural Grille UXAAUSC Sleeve Standard Grille
Trim ring
Installation Accessories (27” sleeve models only)
IMPORTANT:
Operating the air conditioner
with incorrect rear grille or
without Bafe Adapter Kit
(on 19 3/4” deep sleeve) will
recirculate discharge air and
cause compressor overload
to trip.
This will cause the unit to shut
down temporarily and may
lead to premature compressor
failure.
CORRECT Vertical Louvers
INCORRECT Horizontal Louvers
WallMaster
®
27” Sleeve Exterior Grilles
WSE SLEEVE
Optional Architectural Grille- AG
Premium brushed aluminum
grille.
WSE SLEEVE
Standard Grille
Premium, stamped steel grille
with powder coat paint. Ships
with sleeve. Galvanized steel
inner and outer weather panels
also ship with sleeve.
DK / Drain Kit
Installed at the back of the unit and allows for
attachment to condensate disposal system, if
necessary or desired.
IDK / Internal Drain Kit
New construction applications
where a condensate drain system
has been built into the wall interior.
BAK / Bafe Adapter Kit
Necessary when installing in a
sleeve deeper than 16 3/4" deep,
such as Fedders B sleeve
(19 3/4" deep).
US= 3
3
/8”, UE= 2
7
/8”
UNI-FIT
®
FEATURES
Sleeve
Dimensions
Friedrich
USC Sleeve Amana
Carrier
(51S
Series)
Fedders/
Emerson/
Friedrich WSE
Emer-
son/
Fedders
GE/
Hot-
point Whirlpool
White-Westinghouse/
Frigidaire/ Carrier (52F
Series)
Height
(inches)
15 1/2 15 5/8 16 7/8 16 3/4 15 3/4 15 5/8 16 1/2 15 1/4
Width
(inches)
25 7/8 26 25 3/4 27 26 3/4 26 25 7/8 25 1/2
Depth
(inches)
16 3/4 16 7/8 18 5/8 16 3/4 or 19 3/4 15 16 7/8 17 1/8 or 23 16, 17 1/2 or 22
Comfort & Convenience
• 6-way air ow control
• Remote control
• 24-hour timer
• Check lter reminder
• 3-speed fan
• Auto restart
• Defrost control
Energy Management
• Money Saver® setting saves money
by conserving energy
• ENERGY STAR
®
qualied models
• R-410A refrigerant
Health and IAQ
• Washable antimicrobial lter
• Stale air exhaust
Durability & Quality
• Rotary compressors provide quiet,
dependable performance
• Seacoast protection for corrosion
resistance in harsh environments
Installation Features
• Universal t trim ring
• Chassis designed to t 24 ½” to 27”
sleeves
• USC sleeve ts standard 26” sleeve
opening. See installation manual for
exact dimensions.
Accessories
• USC sleeve ships with expanded
aluminum grille
• Replacement grille ships with US/
UE chassis for use in existing sleeves
when a grille is needed
• UXAA architectural grille for use with
USC sleeve
Uni-Fit
®
installs in many existing sleeves.
NOTE: Chassis requires USC sleeve for new installations (sold and shipped separately)
IMPORTANT: 1” gap on sides and 1/2”
gap at top, which allows installation into
varying sleeve sizes, can be covered by
two-piece trim ring that ts over the
chassis front. Trim ring comes standard
with chassis.
Trim ring
NEW!
UXAA- Architectural grille for USC sleeve
6
7