Submittal (2021)

Model Height W idth Depth
Depth
with
Front
Minimum
Extension
Into Room
Minimum
Ex tension
Outside
Thru-the-wall
Finished Hole
Height Width Max. Depth
Uni-Fit
®
USC Sleeve
15
1
/ 2 " 25
7
/ 8 " 16
3
/ 4 " 20
1
/ 2 "
–
1
/ 2 " 15
3
/ 4 " 26
1
/ 8 " 16
1
/ 4 "
UCT, UET Chassis
14
3
/ 8 "
24"
18
1
/ 2 " 20
1
/ 8 " 3
3
/ 4 "
– – – –
SLEEVE/ CHASSIS DIMENSIONS
3
3
/8"
Front
SIDE VIEW
Extension into room
WALL
Sleeve
IMPORTANT:
UCT and UET chassis w/front fully installed into USC
sleeve extends into the room as shown at right
Sleeve
Dimensions
Friedrich
USC Sleeve Amana
Carrier
(51S
Series)
Fedders/
Emerson/
Friedrich WSE
Emerson/
Fedders
GE/
Hotpoint Whirlpool
White-Westinghouse/
Frigidaire/ Carrier (52F
Series)
Height
(inches)
15 1/2 15 5/8 16 7/8 16 3/4 15 3/4 15 5/8 16 1/2 15 1/4
Width
(inches)
25 7/8 26 25 3/4 27 26 3/4 26 25 7/8 25 1/2
Depth
(inches)
16 3/4 16 7/8 18 5/8 16 3/4 or 19 3/4 15 16 7/8 17 1/8 or 23 16, 17 1/2 or 22
UNI-FIT
®
INSTALLS IN MANY EXISTING SLEEVES
OPTIONAL ACCESSORIES
STANDARD GRILLE
Ships with USC sleeve. Expanded aluminum
grille designed for use with USC sleeve.
ARCHITECTURAL GRILLE-UXAA
Optional extruded brushed aluminum grille.
Uni-Fit
®
USC Sleeve Exterior Grilles
IMPORTANT:
When installing into an existing sleeve, consult Installation Section of your Installation/Operation Manual to determine whether
or not the grille needs to be replaced and/or a bafe adapter (included with chassis) should be used.
USC wall sleeve ships with
weather panels and grille.
Sleeve is shown at right with
standard painted steel inner
panel, painted steel outer
panel and standard grille
Inner weather panel USC sleeve Outer weather panel Standard grille
Thru-the-wall_Air_Conditioners_Uni-Fit_Submittal_2021
INSTALLATION