Datasheet

TARGET 3001! Layout CAD http://www.ibfriedrich.com/english/engl_pcbcad.htm
3 von 4 27.04.2007 13:02
Simulation
Detailed information...
Mixed mode simulation form design schematic with a single click - no need to enter separate simulation
schematic!
Components inserted in schematics will automatically have their model associated with them - reduces need for
designer to work with SPICE simulation language
View simulation results in graphical oscilloscope
Analogue & digital simulations realized simultaneously
Digital simulations carried out in fast digital mode rather than at the transistor level
Parameter controlled standard models available: passive components, bipolar transistor, diode, JFET, MOSFET,
switches, controlled sources, logic gates, flip-flops and much more
Many TARGET components already include simulation models
All simulation models and parameters easily editable through a graphical user interface
Directly use SPICE models supplied by component manufacturers
Import any Berkley-SPICE and PSPICE compatible models
PCB Layout
Easy start with flash animations.
Conventional and SMD components supported
Resolution to 1/1,000,000mm (1nm)
World coordinates - 1 inch on screen equals 1 inch on PCB
100 copper layers
Blind and buried vias supported
FPGA's supported
BGA's supported
Rotate components by any angle
Solder pad shapes - circular, octagonal, oblong etc. -freely definable pad stacks
Track features - any track width, circular track, beziér curves, spirals, teardrops etc.
Components editable, even when already in use & independently form library
Component AutoPlacer
Component Management System (provides Shop-links of several distributors as well as datasheet-links)
Hybrid AutoRouter (gridless/shape based). Routing strategy defined by the user
Contour AutoRouter (gridless), using a different algorithm. Routing strategy defined by the user
Electrical Rule Check (ERC) - automatically check design for various logical errors such as shorts, opens, power
supply connections and assignments, pads present at pins, unconnected signals etc.
Design Rule Check (DRC) - apply design rules to ensure conformity to board house requirements. Specify
minimum track widths, track spacing etc.
Creation of testing points
Automatic or user-defined ground planes (copper pour) updated on screen, in real-time
3D view of your layout
Alignment assistant (allows geometrical alignment of identical components in line, matrix or circle )