Service and Parts Manual (2018, 2019, 2020, 2021, 2022)

59 PB
UNIT DISASSEMBLY AND COMPONENT REPLACEMENT
Remove Freshaire Components
WARNING
ELECTRIC SHOCK HAZARD
Turn off electric power before service or
installation. Extreme care must be used, if it
becomes necessary to work on equipment with
power applied.
Failure to do so could result in serious injury or
death.
1. Remove Chassis From wall. (Figure 501).
2. Remove Freshair Cover (Figure 526).
3. Cut wire ties as required.
4. Remove 4 screws from fresh air reactor and un-
plug 2 terminal wires (Figure 527).
5. Remove bracket (2 screws).
6. Remove freshaire filter by sliding out.
7. Remove all screws from fresh air housing.
Figure 526 (Remove Fresh Air Housing)
Figure 527 (Remove Fresh Air brackets)