Product Profile

ManualsBrandsFriedrich ManualsPTAC UnitsFriedrich ZoneAire Premier 9400 BTU 12.1 EER 230/208V Package Terminal Air Conditioner With Electric Heat

PACKAGED TERMINAL

AIR CONDITIONERS

• Tangential blower wheel for

fast, powerful and even air

distribution

• Two permanently-lubricated

fan motors for quiet

operation

• EERs up to 13.0; COPs up

to 3.6

• 2 heating and cooling fan

speeds and AUTO mode

• Separate thermostat

settings (limiting) for

cooling and heating modes

allow for improved comfort

• Internal diagnostic program

• Wireless or wired remote

thermostat operation

• Desk control ready

• Compatible with energy

management systems

• Reversible indoor air

louvers

• Condensate removal

system uses slinger ring

technology to cool the coil

and increase efciency

• Antimicrobial air lters

• Modular design ensures

easy access to key

components

• Constant Fan Mode provides

constant fan operation in

cooling and heating modes.

• Fits standard PTAC sleeve

without added cost of a

bafe kit

• 2-yr. parts and labor

warranty; 5-yr. limited

warranty (see warranty

document on back page for

full details)

Protects the outdoor coil against

deterioration and extends the

life of the unit especially in

harsh coastal environments.

Product Profile

Features

SG SERIES

PTAC_Product_Profile_SG_2015 94304200_01

Summary of content (16 pages)

PAGE 1
Product Profile PACKAGED TERMINAL AIR CONDITIONERS SG SERIES Features • Tangential blower wheel for fast, powerful and even air distribution • Wireless or wired remote thermostat operation • Two permanently-lubricated fan motors for quiet operation • Compatible with energy management systems • EERs up to 13.0; COPs up to 3.
PAGE 2
Product Features 2 DIGITAL TEMPERATURE READOUT By digitally monitoring the desired room temperature, the room is controlled more precisely than conventional systems. The large, easy-to-read LED display can show either the set point or actual room temperature as selected by owner. ONE-TOUCH OPERATION When the unit is powered off, the unit can be returned directly to heating or cooling mode by pressing the ‘Heat’ or ‘Cool’ buttons without the confusing power up sequence of some controls.
PAGE 3
Product Features ELECTRONIC TEMPERATURE LIMITING By limiting the operating range, the property can save energy by eliminating “max cool” or “max heat” situations common with older uncontrolled systems. The new electronic control allows owners to set operating ranges for both heating and cooling independently of one another. DIAMONBLUE™ TECHNOLOGY Diamonblue anticorrosive coating protects the outdoor coil from harsh environments. Standard on all models.
PAGE 4
Chassis Specifications PDE Series PERFORMANCE DATA: COOLING Btu POWER (WATTS) EER DEHUMIDIFICATION (pints/hr) SENSIBLE HEAT RATIO ELECTRICAL DATA: VOLTAGE (1 PHASE, 60 Hz) VOLT RANGE CURRENT (AMPS) POWER FACTOR Compressor LRA Compressor RLA Fan motor horsepower AIRFLOW DATA: INDOOR CFM, HIGH INDOOR CFM, LOW VENT CFM PHYSICAL DATA: DIMENSIONS (H x W x D) NET WEIGHT (lbs.) SHIPPING WEIGHT (lbs.) R-410A CHARGE (oz) Dim.s w/ Pkg.
PAGE 5
Cooling & Heating Performance PDE 230V - Extended Cooling Performance OUTDOOR DRY BULB TEMP. (DEGREES F AT 40% R.H.) 75 85 95 105 110 INDOOR WET BULB TEMP. (DEGREES F AT 80 F D.B.) PDE07 PDE09 PDE12 PDE15 Btu WATTS AMPS SHR Btu WATTS AMPS SHR Btu WATTS AMPS SHR Btu WATTS AMPS SHR 72 8467 449 2.2 0.59 11054 632 3.1 0.58 13877 828 4.1 0.51 17052 1134 5.1 0.46 67 8143 456 2.2 0.8 10631 642 3.1 0.79 13346 841 4.1 0.70 16400 1152 5.2 0.62 62 7538 461 2.3 0.98 9842 649 3.1 0.96 12355 851 4.1 0.
PAGE 6
Cooling & Heating Performance PDE 265V - Extended Cooling Performance OUTDOOR DRY BULB TEMP. (DEGREES F AT 40% R.H.) 75 85 95 105 110 INDOOR WET BULB TEMP. (DEGREES F AT 80 F D.B.) PDE07 PDE09 PDE12 PDE15 72 67 62 72 67 62 72 67 62 72 67 62 72 67 62 Btu 8467 8143 7538 8064 7603 7013 7747 7200 6372 7258 6444 5681 6458 5558 4910 WATTS 449 456 461 489 494 500 550 550 550 595 594 596 648 648 651 AMPS 2 2 2 2.1 2.1 2.2 2.4 2.4 2.4 2.6 2.6 2.
PAGE 7
Electric Heat Data Electric Heat Data PDE/PDH07K PDE/PDH07R HEATER WATTS 2450 2003 3450 2821 VOLTAGE 230 208 230 208 HEATING Btu 8300 6800 11700 9600 8300 11700 HEATING CURRENT (AMPS) 10.7 9.7 15.0 13.6 9.3 13.1 MINIMUM CIRCUIT AMPACITY (MCA) 14.0 14.0 19.0 19.0 12.0 17.0 MAXIMUM OVER CURRENT PROTECTION (MOP/MOCP)/BRANCH CIRCUIT FUSE (AMPS) 15.0 15.0 20.0 20.0 15.0 20.
PAGE 8
Model Identification / Components / Dimensions PTAC/PTHP Model Identification Guide PD H 07 K 3 S G A Series PD = Friedrich Digital PTAC Engineering Digit Design Series System X = Accessory E = Cooling with or without electric heat H = Heat Pump with auxiliary heat Note: All PTAC models with a C design series or later come standard with Diamonblue seacoast protection and digital controls.
PAGE 9
PTAC Cooling Only, Electric Heat, Heat Pump PURCHASER P.O.
PAGE 10
Installation Typical Wall Sleeve Installation (PDXWS) ELECTRICAL RECEPTACLE 42-¼" MIN. LINTEL TO SUPPORT MASONRY WALLS 16-¼" 60" MAX. 20" MAX. SMOOTH SIDE OF SCREW CLIP FACING INTO ROOM 13-¾" INSULATION ELECTRICAL RECEPTACLE WALL OPENING WALL SLEEVE INSULATION NOTE: All 230/208V units are manufactured with a 72” power cord and all 265V units with a 20” power cord.
PAGE 11
Accessory Installation Internal Drain Kit Location and Installation (PXDR10) SCREW WALL SLEEVE OPTIONAL AREA GASKET PREFERRED AREANO FOAM INSULATION MOUNTING PLATE DRAIN TUBE NUT SIDE VIEW IF THE DRAIN MUST BE LOCATED IN THE OPTIONAL AREA, THE FOAM INSULATION MUST BE CUT AWAY AND REMOVED TO ALLOW ACCESS TO THE DRAIN.
PAGE 12
HVAC Engineering Specifications Digital Packaged Terminal Air Conditioners & Heat Pumps Cooling: 7000 – 14500 Btu Heating: 5800 – 13300 Btu (Heat Pump) 6800 – 17000 Btu (Electric Heat) Friedrich Models: PDE – Cooling with or without electric heat PDH – Heat Pump with electric heat All units shall be factory assembled, piped, wired and fully charged with R-410A. All units shall be certified in accordance with ARI Standard 310 for air conditioners and ARI standard 380 for heat pumps.
PAGE 13
Accessories New Construction Accessories PDXWSA WALL SLEEVE Galvanized zinc coated steel is prepared in an 11-step process, then powder coated with a polyester finish and cured in an oven for exceptional durability. The wall sleeve is insulated for sound absorption and thermal efficiency, 16" High x 42" Wide x 13 3/4" Deep. PDXWSEXT18 DEEP WALL SLEEVE For walls up to 17 1/2" deep. PDXWSEXT24 DEEP WALL SLEEVE For walls up to 23 1/2" deep.
PAGE 14
Accessories New Construction Accessories PDXDAA LATERAL DUCT ADAPTER Attaches to the Friedrich PTAC/PTHP unit to direct up to 35% of the total airflow to a second room. The unitmounted duct plenum features a front-mounted aluminum grille that has two positions to provide the most optimal air direction. The air may be directed to either the left or the right of the unit through the supplied 3.5 H" x 7 W" x 47" L plenum. Plenum may be cut to length by the installer.
PAGE 15
THIS PAGE INTENTIONALLY LEFT BLANK.
PAGE 16
Friedrich Air Conditioning Company 10001 Reunion Place, Suite 500 San Antonio, TX 78216 800.541.6645 www.friedrich.com PD-SERIES PACKAGED TERMINAL AIR CONDITIONERS LIMITED WARRANTY SAVE THIS CERTIFICATE. It gives you specific rights. You may also have other rights which may vary from state to state and province to province. In the event that your unit needs servicing, contact your nearest authorized service center.