Product Profile (2019)

14
ACCESSORIES
New Construction Accessories
PDXDAA LATERAL DUCT ADAPTER Attaches to the Friedrich PTAC/PTHP unit to di-
rect up to 35% of the total airow to a second room. The unit-mounted duct
plenum features a front-mounted aluminum grille that has two positions
to provide the most optimal air direction. The air may be directed to either
the left or the right of the unit through the supplied 3
1
/2 H" x 7 W" x 47" L
plenum. Plenum may be cut to length by the installer. Kit includes duct
plenum, front grille, 47" duct extension, duct discharge grille, duct end cap
and all necessary mounting hardware.
PDXDEA
LATERAL DUCT EXTENSION Additional 3
1
/2 H" x 7" W x 47" L plenum for
use with the LATERAL DUCT ADAPTER. A maximum of 3 duct exten-
sions total may be used. Note: Ducted airow is reduced as duct length is
increased.
PXSBA DECORATIVE SUBBASE Provides unit support for walls less than six inches
thick. Includes leveling legs, side filler panels and mounting brack-
ets for electrical accessories. Accepts circuit breaker, power disconnect
switch, or conduit kit.
PXSB ELECTRICAL SUBBASE Provides unit support for walls less than six inches
thick. Includes leveling legs, side ller panels, mounting brackets, a plug-
in receptacle and field-wiring access. The subbase also includes elec-
trical knockouts for a power disconnect switch or circuit breaker.
PXSB23020 Electrical Subbase - 230V 20A
PXSB23030 Electrical Subbase - 230V 30A
PXSB26515 Electrical Subbase - 265V 15A
PXSB26520 Electrical Subbase - 265V 20A
PXSB26530 Electrical Subbase - 265V 30A
RT6
RT6P
DIGITAL REMOTE THERMOSTATS
RT6 Wired, single stage cool, single stage heat for PDE models or single
stage cool, dual stage heat for PDH model thermostat features high/low
fan speed switch. Thermostat is hard wired and can be unit powered.
Features backlit display and multiple conguration modes. For use on
Friedrich PTACs and Vert-I-Paks.
RT6P Wired, programmable single stage cool, single stage heat for PDE
models or single stage cool, dual stage heat for PDH model thermostat
features high/low fan speed switch. Thermostat is hard wired and can be
unit powered. Features backlit display and multiple conguration modes.
For use on Friedrich PTACs and Vert-I-Paks.
WRT1 WIRELESS DIGITAL REMOTE THERMOSTAT Single stage cool, single
stage heat for PDE models or single stage cool, dual stage heat for PDH
model thermostat features high/low fan speed switch. Thermostat is
wireless and is battery powered. Features backlit display and multiple
conguration modes. For use on Friedrich PTACs and Vert-I-Paks.
PDXRTA REMOTE THERMOSTAT ESCUTCHEON KIT This kit contains ten escutch-
eons that can be placed over the factory control buttons when a remote wall
mounted thermostat is used. The escutcheon directs the guest to the wall
thermostat for operation and retains the LED window to display error codes
and diagnostic information.
EMRT1
EMWRT1
ENERGY MANAGEMENT THERMOSTATS
EMRT1
Wired thermostat with occupancy sensor.
EMWRT1
Wireless thermostat with occupancy sensor.
EMOCT EMRAF EMRHCF
Online connection kit. Remote access fee. Remote humidity control fee.