2014 Specialty Product Brochure

Typical Vert-I-Pak
®
installation
ACCESS DOOR OR PANEL
TO CLOSET CAN BE
INSTALLED FROM 3 SIDES
Exterior Wall
Flexible Ductwork
Rigid Ductwork
VPAWP1-8/1-14 Wall Plenum
Plenum
Divider
VPDP1 drain pan beneath
unit is required on all
VEA/VHA24 units. Drain
pan must be installed prior
to chassis installation
Chassis is
shipped with
vibration
isolators
installed
3" Clearance on all
three sides minimum for
service and installation
Optional Platform
Field-supplied
Filter (25" x 20")
58"
29"
Optional field
installed drain pan
(refer to local codes)
VPRG4 Access Panel &
Return Air Filter Grille
Power
Disconnect
A better heating and cool-
ing option inside and out
• Eliminates the clutter of outdoor
condensing units and the need for
vandalism barriers.
• Completely self-contained
• No refrigerant lines running from
oor to oor
• Fast, easy replacement keeps
spaces livable
Improved guest comfort
• Individually controlled
• Heat and cool
• Duct air specically where it’s
needed, not just on the outside wall
• 2-speed fan with constant fan option
A better choice than whole
building solutions
ADVANTAGES INCLUDE:
• Lower installed cost
• Independent metering (no need to
prorate for multitenant applications)
• Individual temperature set point
(one unit can heat and others can
cool)
• Less risk, with a whole building
system spaces may become
uninhabitable until the system is
repaired or replaced
• Vert-I-Paks can be easily accessed
for maintenance or replacement
Installs in a small mechanical
closet and can be ducted to
multiple rooms.
Vert-I-Pak
®
COOLING
9400-17000 Btu
Up to 10.5 EER
ELECTRIC HEAT
AND HEAT PUMPS
3.0 COP
HEAT PUMPS
Vert-I-Pak
®
COOLING
23000 Btu
9.5 EER
ELECTRIC HEAT
AND HEAT PUMP
3.0 COP
HEAT PUMP
41