2014 Specialty Product Brochure

36
STANDARD GRILLE
PXGA
Standard, stamped, anodized aluminum to resist chalking
and oxidation.
ARCHITECTURAL GRILLES
Architectural grilles that consist of heavy gauge 6063-T5 aluminum alloy
PXAA Clear extruded aluminum.
PXBG Beige acrylic enamel.
PXSC Available in custom colors.
DECORATIVE SUBBASE (black)
PXSBA
Provides unit support for walls less than six inches thick. Includes leveling
legs, side ller panels and mounting brackets for electrical accessories.
Accepts circuit breaker, power disconnect switch and conduit kit.
ELECTRICAL SUBBASE
Provides unit support for walls less than six
inches thick. Includes leveling legs, side
ller panels, mounting brackets, a plug-in
receptacle and eld-wiring access. The
subbase also includes electrical knockouts
for a power disconnect switch or circuit
breaker.
POWER CORDS
PXFTA
Antimicrobial air lters. 10 pack.
CONDENSATE DRAIN KIT
PXDR10
Attaches to the bottom of the wall sleeve for internal draining of condensate
or to the rear wall sleeve ange for external draining. Recommended for all
units to remove excess condensate. 10 pack.
LATERAL DUCT ADAPTER
PDXDAA
Attaches to the Friedrich PTAC/PTHP unit to direct up to 35% of the total
airow to a second room. The unit-mounted duct plenum features a front-
mounted aluminum grille that has two positions to provide the most optimal
air direction. The air may be directed to either the left or the right of the
unit through the supplied 3.5 H" x 7 W" x 47" L plenum. Plenum may be cut
to length by the installer. Kit includes duct plenum, front grille, 47" duct
extension, duct discharge grille, duct end cap and all necessary mounting
hardware.
LATERAL DUCT EXTENSION
PDXDEA
Additional 3.5 H" x 7" W x 47" L plenum for use with the LATERAL DUCT
ADAPTER. A maximum of 3 duct extensions total may be used. Note:
Ducted airow is reduced as duct length is increased.
PXSB23020 Electrical Subbase - 230V 15 & 20A
PXSB23030 Electrical Subbase - 230V 30A
PXSB26515 Electrical Subbase - 265V 15A
PXSB26520 Electrical Subbase - 265V 20A
PXSB26530 Electrical Subbase - 265V 30A
OPTIONAL ACCESSORIES
PXAA
PDXDAA and PDXDEA ship together
Length
PXPC23000 LCDI 230V 15A Cord - 00 kW (for use PDE models only) 6 ft.
PXPC23015 LCDI 230V 15A Cord - 2.0 kW 6 ft.
PXPC23020 LCDI 230V 20A Cord - 3.0 kW 6 ft.
PXPC23030 LCDI 230V 30A Cord - 5.0 kW 6 ft.
PXPC26515 Non-LCDI 265V 15A Cord - 2.0 kW 18 inches
PXPC26520 Non-LCDI 265V 20A Cord - 3.0 kW 18 inches
PXPC26530 Non-LCDI 265V 30A Cord - 5.0 kW 18 inches