2014 Specialty Product Brochure

34
Comfort & Dehumidification
• Removes up to 3.2 pts./hr. of moisture
in cool mode to improve comfort and
reduce the chance of mold and mildew
growth
• Intuitive unit controls are easy to
operate and operate either set point or
room temperature
• Owner-congurable 'Constant Fan'
mode
• 'Instant Heat' heat pump mode
quickly heats a room to the desired
temperature for increased comfort
• 'Even-heat Monitoring' checks room
temperature and automatically adds
heat boost if necessary
• The digital control panel will
automatically run the fan to briey
sample the room temperature every
nine minutes to ensure desired
conditions are maintained
Maintenance & Installation
Features
• Universal heaters with heat capacities
determined by the power cords;
achieve up
to 48 PTAC
SKUs with
16 units by
changing the
power cord
size
• Remote
thermostat
pop-out
wiring
module allows easier
wiring and unit
changeout without
rewiring thermostat
• May be installed ush
with the oor
• Reversible indoor air
louvers
• Condensate disposal
system
• Improved weather barrier
• Emergency heat override ensures heat
mode operation even in the unlikely
event of compressor failure
• Modular product design ensures easy
access to key components for cleaning
and repairs– including washable, lift-
out air lters
• Depth of front is 7 3/4 inches which
preserves indoor oor space
Energy management ther-
mostats available (wired &
wireless)
• Integrated occupancy sensor
• Auto changeover
• 5 distinct energy presets
• Unique energy savings features
• Comprehensive remote management
capability*
Health & IAQ
• Fresh air damper to bring in fresh
outside air when desired
• Two, easy-access washable,
antimicrobial air lters
• Up to 3.2 pts./hr. dehumidication
Sound Reduction Technology
• Two permanently lubricated fan
motors for added durability and
reduced sound levels indoors
• Quiet, efcient rotary compressor
mounted with vibration isolators
to keep the compressor running
smoothly and quietly
• High-density insulation blocks
outdoor noise
Durability
• Faultless sure-hold front cover system
securely attaches the front each time
• Random compressor restart protects
electrical systems from overload when
power is restored
• Quiet, efcient rotary compressor
mounted with vibration isolators
to keep the compressor running
smoothly and quietly
• Steel base pan and sleeve
• Stainless steel outdoor end plates
• Room freeze protection
MORE STANDARD FEATURES
Durable construction
• Steel base pan and sleeve that are
powder-coat painted to resist rust and
corrosion
• Outdoor coil end plates are stainless
steel to resist rust and corrosion
(other PTACs use lower grade steel)
• Every PTAC unit is run-tested at the
factory to reduce problems in the eld
• 14 numeric service error codes
stored in memory facilitate rapid unit
diagnostics
• Easy access, long-life lters simplify
maintenance that extends the life of
the product
• Room freeze protection- initiates
heat if temperature falls to 40°F in an
unoccupied room
• Random compressor restart protects
electrical systems from overload when
power is restored
• Tamper-resistant grille and durable
front panel with break-proof control
door design
• Indoor coil frost sensor protects the
compressor to lengthen the life of the
unit
• 2 year full warranty on parts and
labor; 5 year limited warranty
• Backed by a nationwide service
network, and U.S.-based Friedrich
expert technical team
Energy efficient and energy
smart PTACS
Super efcient refrigeration design
with EERs up to 12.2; COPs up to 3.4
All units are available in energy
efcient heat pump models
Electronic defrost control ensures
more run time in efcient heat pump
mode
Ability to adjust low/high
temperature range limits for
reduced energy usage
Thicker steel inner-wall and foam
construction decreases thermal
transfer and energy loss
Condensate removal system uses
slinger ring technology to cool the
coil and increase efciency
Desk control ready allowing hotel
owners to control units from a
central location
* Energy management capability requires purchase of additional hardware and service fee