Wi-Fi Operation Manual (2020, 2021, 2022)
ManualsBrandsFriedrich ManualsAir ConditionersKuhl Plus Series Smart Heat Pump Window or Wall Air Conditioner with 10000 Cooling BTU, 8800 Heating BTU, 450 sq. ft. Cooling Area, 300 CFM, 4 Cooling Speed, Remote Controller, 115 Volts, 10.9 EER Remote Control, Wi-Fi Enabled, Timer, Auto Restart, Washab
Table Of Contents
- INTRODUCTION
- IMPORTANT SAFETY INFORMATION
- PERSONAL INJURY OR DEATH HAZARDS
- FCC Caution
- Kuhl, Kuhl Q, And Wallmaster Controls
- KUHL, KUHL Q, AND WALLMASTER
- Wi-Fi SET UP INSTRUCTIONS
- Wi-Fi TROUBLESHOOTING TIPS
- FA Pro/ FA Premier App Info
- FA Pro, FA Premier Troubleshooting
- Chill Premier/ Unifit App Info
- Chill Premier/ Unifit Registration
- Chill Premier/ Unifit Login
- Chill Premier/ UnifitTroubleshooting
- Portable Air Conditioner (ZCP08SA, ZCP10SA, ZCP12SA) App Info
- Portable Air Conditioner (ZCP08SA, ZCP10SA, ZCP12SA) Registration
- Portable Air Conditioner (ZCP08SA, ZCP10SA, ZCP12SA) Login
- Portable Air Portable Air Conditioner Troubleshooting (ZCP08SA, ZCP10SA, ZCP12SA)
- Portable Air Conditioner (ZCP12DB and ZHP14DB) App Info
- Portable Air Conditioner (ZCP12DB and ZHP14DB) Registration
- Portable Air Conditioner (ZCP12DB and ZHP14DB) Login
- Portable Air Conditioner Troubleshooting (ZCP12DB and ZHP14DB)
17 PB
FRIEDRICH GO
FA Pro/ FA Premier
Follow the directions below to add an AC to your FriedrichGo account.
This will allow you to control your units from your mobile app:
1. Press the “+” and click the “Floating Air Pro/Premier” to connect to.
Connecting your AC to a wireless network can be completed using AP (Access Point) Mode.
(Reminder-The FriedrichGo App only works on 2.4 GHZ networks)
Setup Modes:
1. “77” should show on the page as illustrated below. Press “Next Step” to continue.