Service & Parts Manual (Non Q) (2019, 2020, 2021, 2022)
ManualsBrandsFriedrich ManualsAir ConditionersKuhl Plus Series Smart Heat Pump Window or Wall Air Conditioner with 10000 Cooling BTU, 8800 Heating BTU, 450 sq. ft. Cooling Area, 300 CFM, 4 Cooling Speed, Remote Controller, 115 Volts, 10.9 EER Remote Control, Wi-Fi Enabled, Timer, Auto Restart, Washab
Table Of Contents
- INTRODUCTION
- SPECIFICATIONS
- OPERATION
- ROUTINE MAINTENANCE
- REMOVE AND INSTALL THE CHASSIS
- R-410A SEALED SYSTEM REPAIR
- COMPONENT TESTING
- Hermetic Components Check
- Reversing Valve Description And Operation
- Testing The Reversing Valve Solenoid Coil
- Checking The Reversing Valve
- Replace The Reversing Valve
- Touch Test Chart : To Service Reversing Valves
- Compressor Checks
- Compressor Replacement
- Fan Motor
- Capacitors
- Heating Element
- Drain Pan Valve
- Testing the User Interface and Electronic Control Board
- Thermistors Description
- Electronic Control Board Identification
- Replace the Electronic Control Board
- Replace the User Interface
- TROUBLESHOOTING
- WIRING DIAGRAMS
- PARTS CATALOG
- Available Accessories
30 PB
OPERATION
Wi-Fi SET UP INSTRUCTIONS (Continued)
10. Go to the Wi-Fi settings on your mobile device and connect to
“FriedrichConnect_xxxx” network. (xxxx is the network name of the
Friedrich unit)
Step 10 (Connect WiFi to “Friedrich”)
Step 11 (Click next)
12. A screen will appear asking you to enter your Wi-Fi credentials.
13. Enter the information as you recorded it at the beginning of the
process.
NOTE: Your device may auto populate the elds incorrectly.
NOTE: Be sure to enter the WIFI SSID, Network Security Type, and
Wi-Fi network password exactly as you recorded them.
NOTE: These elds are case-sensitive.
Step 12 an 13 (Enter WiFi Credentials)
11. Go back to the Friedrich instructions on your mobile device and click
next.