Service & Parts Manual (Non Q) (2019, 2020, 2021, 2022)
ManualsBrandsFriedrich ManualsAir ConditionersKuhl Plus Series Smart Heat Pump Window or Wall Air Conditioner with 10000 Cooling BTU, 8800 Heating BTU, 450 sq. ft. Cooling Area, 300 CFM, 4 Cooling Speed, Remote Controller, 115 Volts, 10.9 EER Remote Control, Wi-Fi Enabled, Timer, Auto Restart, Washab
Table Of Contents
- INTRODUCTION
- SPECIFICATIONS
- OPERATION
- ROUTINE MAINTENANCE
- REMOVE AND INSTALL THE CHASSIS
- R-410A SEALED SYSTEM REPAIR
- COMPONENT TESTING
- Hermetic Components Check
- Reversing Valve Description And Operation
- Testing The Reversing Valve Solenoid Coil
- Checking The Reversing Valve
- Replace The Reversing Valve
- Touch Test Chart : To Service Reversing Valves
- Compressor Checks
- Compressor Replacement
- Fan Motor
- Capacitors
- Heating Element
- Drain Pan Valve
- Testing the User Interface and Electronic Control Board
- Thermistors Description
- Electronic Control Board Identification
- Replace the Electronic Control Board
- Replace the User Interface
- TROUBLESHOOTING
- WIRING DIAGRAMS
- PARTS CATALOG
- Available Accessories
28 PB
Wi-Fi SET UP INSTRUCTIONS
Below are the set-up instructions for Wi-Fi to use your unit wirelessly.
Follow the instructions below:
1. Write down the following information prior to beginning this process
(If you do not know this information you can check your router or contact
your internet provider)
a. WI-FI Network Name (SSID)__________________________
b. WI-FI Network Security Type (Open, wep, wpa, wpa2) _________
c. WI-FI Network Password ___________________________
2. Using a mobile device such as a smartphone or laptop, navigate to www.
FriedrichConnect.com.
NOTE: If you do not have an account with FriedrichConnect you will be
given the option to create a new account.
3. Sign-in using your username and password.
4. Click the “Add Device” button.
5. Select the time zone the device is located in and click the “Next” button.
OPERATION
Step 3 (Login)
Step 4 (Add Device)
Step 5 (Select Time Zone)