Service & Parts Manual (2019, 2020, 2021, 2022)
ManualsBrandsFriedrich ManualsAir ConditionersKuhl Plus Series Smart Heat Pump Window or Wall Air Conditioner with 10000 Cooling BTU, 8800 Heating BTU, 450 sq. ft. Cooling Area, 300 CFM, 4 Cooling Speed, Remote Controller, 115 Volts, 10.9 EER Remote Control, Wi-Fi Enabled, Timer, Auto Restart, Washab
Table Of Contents
40 PB
REMOVE AND INSTALL THE CHASSIS
REMOVE AND INSTALL THE CHASSIS
Remove the chassis
1. Remove the EntryGard™ Screws. (Refer to Figure
501)
2. Hold the cabinet stationary then carefully slide the
unit out of the sleeve. Make sure to fully support the
unit. (Refer to Figure 502)
Install the Chassis
1. Carefully team lift the chassis and set it into the
cabinet. (Refer to Figure 501)
2. Slide the chassis into the cabinet
4. Reinstall the EntryGard™ screws.. (Refer to Figure
502)
WARNING
ELECTRIC SHOCK HAZARD
Disconnect power to the unit before
servicing. Failure to follow this warning
could result in serious injury or death.
Figure 502 (Remove Chasis)
Figure 501 (Remove Entry Gard Screws)