Service & Parts Manual (2019, 2020, 2021, 2022)
ManualsBrandsFriedrich ManualsAir ConditionersKuhl Plus Series Smart Heat Pump Window or Wall Air Conditioner with 10000 Cooling BTU, 8800 Heating BTU, 450 sq. ft. Cooling Area, 300 CFM, 4 Cooling Speed, Remote Controller, 115 Volts, 10.9 EER Remote Control, Wi-Fi Enabled, Timer, Auto Restart, Washab
Table Of Contents
28 PB
OPERATION
Wi-Fi SET UP INSTRUCTIONS (Continued)
6. To start the setup process click the menu button on the Control Panel of your Kühl model.
NOTE: If the Display is not illuminated, you will need to need click the menu button to illuminate the Display and then click
it again to start the setup process.
7. Using the up and down arrows, navigate to the CnCT screen.
Step 8 (Begin the Setup Process)
MENU RETURN
8. Click the menu button, this will begin the setup process for your Friedrich Connect enabled device.
NOTE: When the setup process starts, the WI-FI symbol will begin to ash. This indicates the A/C unit is trying to connect to
your Wi-Fi network
NOTE: Once the setup process has been started, you will have ve minutes to complete the setup. If the setup can not be
completed in ve minutes the system will rest and you will need to restart the process.
Steps 6 and 7 (Get to the CnCT Screen)
MENU RETURN
9. After the Wi-Fi symbol starts blinking, click the “Next” button on your
mobile device.
NOTE: If the Wi-Fi setup is not completed on the rst attempt, you may
need to reset the Air Conditioning control unit. To accomplish this, turn the
unit off, and unplug the Air Conditioning unit for a minimum of 15 seconds.
Plug the unit back in and start the setup process over.
Step 9 (Click Next)