Wi-Fi Operation Manual (2020, 2021, 2022)
Table Of Contents
- INTRODUCTION
- IMPORTANT SAFETY INFORMATION
- PERSONAL INJURY OR DEATH HAZARDS
- FCC Caution
- Kuhl, Kuhl Q, And Wallmaster Controls
- KUHL, KUHL Q, AND WALLMASTER
- Wi-Fi SET UP INSTRUCTIONS
- Wi-Fi TROUBLESHOOTING TIPS
- FA Pro/ FA Premier App Info
- FA Pro, FA Premier Troubleshooting
- Chill Premier/ Unifit App Info
- Chill Premier/ Unifit Registration
- Chill Premier/ Unifit Login
- Chill Premier/ UnifitTroubleshooting
- Portable Air Conditioner (ZCP08SA, ZCP10SA, ZCP12SA) App Info
- Portable Air Conditioner (ZCP08SA, ZCP10SA, ZCP12SA) Registration
- Portable Air Conditioner (ZCP08SA, ZCP10SA, ZCP12SA) Login
- Portable Air Portable Air Conditioner Troubleshooting (ZCP08SA, ZCP10SA, ZCP12SA)
- Portable Air Conditioner (ZCP12DB and ZHP14DB) App Info
- Portable Air Conditioner (ZCP12DB and ZHP14DB) Registration
- Portable Air Conditioner (ZCP12DB and ZHP14DB) Login
- Portable Air Conditioner Troubleshooting (ZCP12DB and ZHP14DB)
17 PB
FRIEDRICH GO
FA Pro/ FA Premier
Follow the directions below to add an AC to your FriedrichGo account.
This will allow you to control your units from your mobile app:
1. Press the “+” and click the “Floating Air Pro/Premier” to connect to.
Connecting your AC to a wireless network can be completed using AP (Access Point) Mode.
(Reminder-The FriedrichGo App only works on 2.4 GHZ networks)
Setup Modes:
1. “77” should show on the page as illustrated below. Press “Next Step” to continue.