Service & Parts Manual (2019, 2020, 2021, 2022)

39 PB
ROUTINE MAINTENANCE
Filter Removal / Installation Instructions
1. Swing the door open, See Figure 402,and remove the lter by grasping the lter grips and pulling the bottom towards you. . See Figure 403.
2. Clean the front frame by removing the carbon lter (if installed) and washing the dirt from the lter. Use a mild soap solution if necessary. Allow lter
to dry.
NOTE: The carbon lter is not a reusable lter, and needs to be replaced every three months for optimum efciency.
3. Install new carbon lter (optional) by aligning holes on carbon lter with tabs on mesh lter. (See Figure 404).
4. Install lter and close door. See Figures 402 and 403
Figure 402
Figure 403
Filter
Filter grip
Filter Frame Tabs
Figure 404