Installation & Operation Manual

6 7

Standard Filter Cleaning / Installation Instructions

STEP 1. Swing the door open and remove the lter by grasping the lter

grip and pushing the lter holder upward and outward.

STEP 2. Slide the lter grip out from the lter as shown in Figure 4.

NOTE: Make sure the front frame with the mesh lter is facing you.

Figure 2

Figure 3

FRR052

Figure 4

FRR047

STEP 3. Swing the front frame open. Clean the front frame by washing

the dirt from the lter. Use a mild soap solution if necessary.

Allow lter to dry.

Figure 5

FRR048

STEP 4. Install the lter grip back into the lter by sliding it into the lter.

NOTE: The lter handle slides into the frame in only one direction. If the

tab in the frame stops the handle from sliding in, slide the handle

from the other direction. DO NOT FORCE THE HANDLE INTO

THE FRAME.

STEP 5. Install the lter back into the unit. Follow the instructions on the

inside of the front door.

HANDLE

FILTER GRIP

FILTER

FRONT

FRAME WITH

STANDARD

MESH FILTER

TOP TAB

FRR071