PTAC Brochure

7
STANDARD GRILLE
PXGA
Standard, stamped, anodized aluminum to resist chalking and oxidation.
ARCHITECTURAL GRILLES
Architectural grilles consist of heavy gauge 6063-T5 aluminum alloy.
PXAA Clear extruded aluminum.
PXBG Beige acrylic enamel.
PXSC Available in custom colors.
DECORATIVE SUBBASE (black)
PXSBA
Provides unit support for walls less than six inches thick. Includes leveling legs,
side ller panels and mounting brackets for electrical accessories. Accepts
circuit breaker, power disconnect switch and conduit kit.
ELECTRICAL SUBBASE
Provides unit support for walls less than six
inches thick. Includes leveling legs, side
ller panels, mounting brackets, a plug-in
receptacle and eld-wiring access. The sub-
base also includes electrical knockouts for
power disconnect switch or circuit breaker.
POWER CORDS
Universal power cords
enable properties to select
the appropriate heater size.
Reference the adjacent table
for power cord options"
PXFTA
Antimicrobial air lters. 10 pack. Each PTAC requires 2 lters.
CONDENSATE DRAIN KIT
PXDR10
Attaches to the bottom of the wall sleeve for internal draining of condensate, or
to the rear wall sleeve ange for external draining. Recommended for all units to
remove excess condensate. 10 pack.
LATERAL DUCT ADAPTER
PDXDAA
Attaches to the Friedrich PTAC/PTHP unit to direct up to 35% of the total airow to a
second room. The unit-mounted duct plenum features a front-mounted aluminum
grille that has two positions to provide the most optimal air direction. The air may
be directed to either the left or the right of the unit through the supplied 3
1
/2" H x
7" W x 47" L plenum. Plenum may be cut to length by the installer. Kit includes duct
plenum, front grille, 47" duct extension, duct discharge grille, duct end cap and all
necessary mounting hardware.
LATERAL DUCT EXTENSION
PDXDEA
Additional 3
1
/2" H x 7" W x 47" L plenum used with the LATERAL DUCT ADAPTER.
A maximum of three duct extensions may be used together. Note: Ducted airow
is reduced as duct length is increased.
PXSB23020 Electrical Subbase - 230V 15 & 20A
PXSB23030 Electrical Subbase - 230V 30A
PXSB26515 Electrical Subbase - 265V 15A
PXSB26520 Electrical Subbase - 265V 20A
PXSB26530 Electrical Subbase - 265V 30A
OPTIONAL ACCESSORIES
PXAA
PDXDAA and PDXDEA ship together
Length
PXPC23015A LCDI 230V 15A Cord - 2.5 kW 67 in.
PXPC23020A LCDI 230V 20A Cord - 3.5 kW 67 in.
PXPC23030A LCDI 230V 30A Cord - 5.0 kW 67 in.
PXPC26515A Non-LCDI 265V 15A Cord - 2.5 kW 27 1/2 in.
PXPC26520A Non-LCDI 265V 20A Cord - 3.5 kW 27 1/2 in.
PXPC26530 Non-LCDI 265V 30A Cord - 5.0 kW 27 1/2 in.
PXGA
PXSBA
PXSB
PXPC
PXFTA
PXDR10