PTAC Brochure

6 | FRIEDRICH SG SERIES PTAC
RT6P, RT6 WRT1
EMRT1, EMWRT1 EMOCT
OPTIONAL ACCESSORIES
WALL SLEEVE
PDXWSA
Galvanized steel is prepared in a multi-step process for stronger paint adhesion,
then powder coated with a polyester finish and cured in an oven for exceptional
durability. The wall sleeve is insulated for thermal efciency and noise reduction.
SLEEVE DIMENSIONS: 16" H x 42" W x 13
3
/4" D
CUT OUT DIMENSIONS: 16
1
/4" H x 42
1
/4" W
FRONT COVER DIMENSIONS: 16" H x 42" W x 7
3
/4" D
DEEP WALL SLEEVES
PDXWSEXT18
For walls up to 17
1
/2” deep.
PDXWSEXT24
For walls up to 23
1
/2” deep.
PDXWSEXT (Custom depth wall sleeve)
One-piece, extended wall sleeve with built-in bafe for walls from 13
1
/4" to 25
1
/2"
deep are available by special order.
SLEEVE EXTENSION RETROFIT KIT
PXSE
2
1
/4" sleeve extension attached to the room side of the sleeve to allow for the
installation of a PD-series Friedrich PTAC in an 11
1
/2" deep T-series sleeve.
DIGITAL REMOTE THERMOSTAT
Wall-mounted digital thermostats with two fan speeds.
Single stage cool / heat for PDE models.
Single stage cool / dual stage heat for PDH models
Features backlit display and multiple conguration modes, available in wired and
wireless options.
RT6P
Wired, single stage, wall-mounted programmable thermostat has two fan speeds
and backlight
.
RT6
Wired wall-mounted thermostat (can be unit powered).
WRT1
Wireless wall-mounted thermostat (battery powered).
FRIEDRICHLINK
®
ENERGY MANAGEMENT THERMOSTATS
EMRT1
Wired thermostat with occupancy sensor.
EMWRT1
Wireless thermostat with occupancy sensor.
EMOCT EMRAF EMRHCF
Online connection kit. Remote access fee. Remote humidity control fee.
REMOTE THERMOSTAT ESCUTCHEON KIT
PDXRTA
Kit contains escutcheons that can be placed over the factory control buttons
(recommended when a remote wall mounted thermostat is used as controls
become inoperable). The escutcheon directs the user to the wall thermostat
for operation and retains the LED window to display error codes and diagnostic
information. 10 pack.
CONDUIT KIT /JUNCTION BOX
PXCJA
Hard wire conduit kit with junction box for 208/230V and 265V units (subbase not
required). Kit includes a means of quick disconnect for easy removal of the chassis.
SUBBASE DISCONNECT SWITCH
PXDS
Deep wall sleeve extension PDXWSEXT18 shown with
weather panel in place
PDXWSA
PXSE
PDXRTA
PXCJA
PXDS