Operating Guide Compact Programmable Room Air Conditioner with remote control CP14 CP18 CP24 Please register your air conditioner Whenever you call to request service on your appliance, you will need to provide your complete model number and serial number. You can find this information on the model and serial number label.
Table of Contents Air Conditioner Safety ......................................................................................................................................................2 Installation Requirements ...............................................................................................................................................3 Tools and Parts ....................................................................................................................................
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions: ■ Plug into a grounded 3 prong outlet. ■ Do not use an extension cord. ■ Do not remove plug ground prong. ■ Unplug air conditioner before servicing. ■ Do not use a plug adapter. ■ Use two or more people to move and install air conditioner.
Window installation Electrical Requirements Window opening measurements: 27"min. to 42" max. (76.2 cm to 101.6 cm) opening width (A). WARNING 20" min. (50.8 cm) opening height (B). Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove powercord ground prong. A Do not use a plug adapter. B Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. A.27" min. (76.2 cm) B . 20" min. (50.
Recommended grounding method This air conditioner must be grounded. This air conditioner is equipped with a power supply cord having a grounded 3 prong plug. To minimize possible shock hazard, the cord must be plugged into a mating, grounded 3 prong outlet, grounded in accordance with all local codes and ordinances. If a mating outlet is not available, it is the customer' s responsibility to have a properly grounded 3 prong outlet installed by a qualified electrical component installer.
Installation Instructions Unpacking WARNING 5. Remove window lock bracket and screw from 6. the Remove front panel screw from right sidethe of air filter conditioner area. and set aside. Excessive Weight Hazard Use two or more people to move and install air conditioner. Failure to do so can result in back or other injury. Remove packaging materials Remove and dispose of or recycle packaging materials. Remove tape and glue residue from surfaces before turning on the air conditioner.
Window Installation (on some models) NOTES: ■ Handle air conditioner carefully and gently. ■ Be sure your air conditioner cabinet does not fall out of the opening during installation or removal. ■ The place where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a grounded 3 prong power outlet. ■ Do not block the louvers on the front panel. ■ Do not block the louvers on the outside of the air conditioner.
Install Cabinet into Window Attach Side Curtains to Window Frame ■ Handle air conditioner carefully and gently. ■ Be sure your air conditioner cabinet does not fall out of the opening during installation or removal. ■ The place where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a grounded 3 prong power outlet. ■ Do not place cabinet where front louvers will be blocked. ■ Do not place cabinet where outside louvers will be blocked. 1.
2. Using #10 x ⁷⁄₈" pan-head Phillips screws, attach bracket to cabinet. Repeat for other bracket. 3. Loosen locking nut and turn the adjustment bolt (C) for each bracket until the bolt touches the wall (B). 4. Tighten the locking nut on adjustment bolt to lock in position. Complete Installation 1. Insert seal behind the top of the lower window sash and against the glass of the upper window (B). 2.
■ Use 2" x 4" or thicker lumber for wood frame. 2. Insert cabinet into the framed wall opening. The top of the cabinet should extend ³⁄₄" (19.1 mm) into the room. If there is trim, the cabinet should extend ³⁄₄" (19.1 mm) past the trim. A B A B C A. Outside width B. Outside height C. Depth 4. Apply wood preservative to the outside exposed surface. 5. Insert the frame in the wall opening. Square and level frame. 6. Attach frame securely to the wall. A. ³⁄₄ " (19.1 mm) extending into room B. Trim 3.
WARNING 5.5. Using 2 -1#10 x ³⁄₈" screws, of Using - #10 x 3round-head /8" round-head screw,attach attachbottom front offront panel panel to chassis. to chassis. Electrical Shock Hazard Connect green ground wire to ground screw. Failure to do so can result in death or electrical shock. 3. Connect green ground wire to cabinet base with ground screw. Position ground wire pointing straight up. Put excess ground wire between coil and air conditioner cabinet. 6. Reinstall filter and replace front grille.
Starting Your Air Conditioner—Digital Control Temperature Money Saver® Auto Swing Press, or press and hold, the plus button to raise the temperature 1º until it reaches 86ºF (30ºC). Timer F 0 F 0 Temp/Hour Temp/Hour Hr. POWER Hr. High Cool Mode Med Fan Speed Low Fan Only Press, or press and hold, the minus button to lower the temperature 1º until it reaches 64ºF (18ºC). 1. Press POWER to turn on air conditioner.
To operate air conditioner with remote control NOTE: Remote control may vary in appearance. To raise the temperature: Press the plus button to raise the temperature. Each time you press or hold the plus button, the temperature will go up 1º until it reaches 86°F (30°C). To lower the temperature: Press the minus button to lower the temperature. Each time you press or hold the minus button, the temperature will go down 1º until it reaches 64°F (18°C).
Air Conditioner Care Your new air conditioner is designed to give you many years of dependable service. This section tells you how to clean and care for your air conditioner properly. Call your local authorized dealer for an annual checkup. Remember… the cost of this service call is your responsibility. Cleaning the Air Filter The air filter is removable for easy cleaning. A clean filter helps remove dust, lint, and other particles from the air and is important for best cooling and operating efficiency.
Air conditioner power supply cord trips (Reset button pops out) ■ Disturbances in your electrical current can trip (Reset button will pop out) the power supply cord. Press and release RESET (listen for click; Reset button will latch and remain in) to resume operation. ■ Electrical overloading, overheating, cord pinching or aging can trip (Reset button will pop out) the power supply cord.
Friedrich Air Conditioning Company P.O. Box 1540 San Antonio, TX 78295 210.357.4400 www.friedrich.com ROOM AIR CONDITIONERS LIMITED WARRANTY FIRST YEAR ANY PART: If any part supplied by FRIEDRICH fails because of a defect in workmanship or material within twelve months from date of original purchase, FRIEDRICH will repair the product at no charge, provided room air conditioner is reasonably accessible for service.
