Wi-Fi Operation Manual (2020, 2021, 2022)

25 PB
FRIEDRICH GO
FA Pro, FA Premier Troubleshooting
Description Analysis
Air Conditioner set up unsuccessful!
1. Check that the Wi-Fi address and password is correct for
the network you are trying to connect to.
2. Check the air conditioner under configuration status.
3. Check to make sure no firewalls or other restrictions are
preventing setup on the wireless network.
4. Check that the router is working properly.
5. Make sure air conditioner,router and mobile device are
all within signal range to connect.
6. Check to see if the router is blocking the FriedrichGo App
from connecting
7. Please note-The Friedrich Go App is supported on 2.4
GHZ Wi-Fi Channels only. Please be sure your connection is
using a Wi-Fi channel broadcasting in 2.4GHz.
Mobile Device not controlling Air
Conditioner.
Software display: Identification failed.
This means that the air conditioner has been reset and the
mobile device has lost the control permissions.
Reconnection to the WI-Fl network is required. If this does
not fix the issue. Please delete the selected air conditioner
in the app and reinstall.