Installation and Operations Manual (2019, 2020, 2021)

12
Press the SLEEP button, all the
display lights will turn off after a while, but the
SLEEP light is always on. In SLEEP mode, the air
conditioner will automatically adjust the tempera-
ture and fan speed to make the room more comf-
ortable during the night. The set temperature will
automatically change every 30-60 minutes and at
most change six times until the setting temperat-
ure is 81ºF or 82ºF for cooling mode and 75ºF or
76ºF for heating mode.
7. Sleep Button:
Press the FAN SPEED button
to choose the fan speed options. You can choose
Hi, Med, Lo or auto speed in COOL or HEAT mode
and choose Hi, Med, Lo in FAN mode.
8. Fan Speed Button:
9.
When the Filter Check light is off,
it is useless to press the Filter Check button.
When the Filter Check light is on, it can turn off the
light by pressing the Filter Check button. After the
fan motor works for 500 total hours, the Filter
Check light will turn on to remind the user to clean
the filter.
Filter Button:
10.
To direct the airflow,
horizontal wheel to control the horizontal direction,
air deflector to control the vertical direction.
Directional Louvers:
horizontal wheelair deflector air deflector
When the unit is in Money
Saver mode, the light will turn on. In Money Saver
mode, the unit will turn-off once the room is cooled
to the user set temperature. The unit will turn back
on when the room temperature rises above the
user set temperature. Before the compressor
, the fan motor will run for a while, starts then it will
stop for a while., It will repeat to provide a much
more comfortable feeling and save energy.
6. Money Saver Button: