Installation & Operation Manual (2020)

5. Remove the control panel screw and WI-FI module

screw (if available) from the front panel.

1. Pull down the front panel and remove the filter.

2. Lift the front panel upwards to remove and place

to the side.

3. Locate the two faceplate screws and remove.

These screws will need to be re-installed prior

to mounting the air conditioner.

4. After removing the screws, gently pull away the

faceplate from the air conditioner cabinet.

REMOVE FRONT PANEL AND CHASSIS

6.Remove the screws from the cabinet.

7. Hold the cabinet while pulling on the base

handle to carefully remove the unit. Do not pull

or lift near the top of the unit.

Do not pull or lift

this area. It may

cause damage.

Pull the base handle.