Wi-Fi Operation Manual
Table Of Contents
- INTRODUCTION
- IMPORTANT SAFETY INFORMATION
- PERSONAL INJURY OR DEATH HAZARDS
- FCC Caution
- Kuhl, Kuhl Q, And Wallmaster Controls
- KUHL, KUHL Q, AND WALLMASTER
- Wi-Fi SET UP INSTRUCTIONS
- Wi-Fi TROUBLESHOOTING TIPS
- FA Pro/ FA Premier App Info
- FA Pro, FA Premier Troubleshooting
- Chill Premier/ Unifit App Info
- Chill Premier/ Unifit Registration
- Chill Premier/ Unifit Login
- Chill Premier/ Unifit Troubleshooting
33 PB
3.To the switch the AC unit over to AP mode - Press "Display" on the remote control 6 times within
6 seconds so the AC unit switches from "CF mode" to "AP mode". Allow the unit 10-15 seconds
to switch modes and AP will flash on the AC unit display screen when complete.
4.Select the Wi-Fi network you are trying to connect to and type in the password and press "Next"
to continue.
7
5.
6.
Open your mobile device settings to get to Wi-Fi connections.
"SmartLife-xxxx" should show as an available network connection option.
Trying to Connect Device
Open phone setting-WLAN and connect to the Wi-
Fi network
Not connecting? Refer to help
""
9:41 AM 100%
Settings Wi-Fi
Wi-Fi
SmartLife-XXXX
CHOOSE A NETWORK...
360WiFi-707
airtake-5G
Connect now
FRIEDRICH GO
Chill Premier/ Unit
3.To the switch the AC unit over to AP mode - Press "Display" on the remote control 6 times within
6 seconds so the AC unit switches from "CF mode" to "AP mode". Allow the unit 10-15 seconds
to switch modes and AP will flash on the AC unit display screen when complete.
4.Select the Wi-Fi network you are trying to connect to and type in the password and press "Next"
to continue.
7
5.
6.
Open your mobile device settings to get to Wi-Fi connections.
"SmartLife-xxxx" should show as an available network connection option.
Trying to Connect Device
Open phone setting-WLAN and connect to the Wi-
Fi network
Not connecting? Refer to help
""
9:41 AM 100%
Settings Wi-Fi
Wi-Fi
SmartLife-XXXX
CHOOSE A NETWORK...
360WiFi-707
airtake-5G
Connect now
3. To the switch the AC unit over to AP mode - Press “Display” on the remote control 6 times within 6 seconds
so the AC unit switches from “CF mode” to “AP mode”. Allow the unit 10-15 seconds to switch modes and AP will
flash on the AC unit display screen when complete.
4. Select the Wi-Fi network you are trying to connect to and type in the password and press “Next” to continue.
5. Open your mobile device settings to get to Wi-Fi connections.
6. “SmartLife-xxxx” should show as an available network connection option.