Installation and Operations Manual (2019, 2020, 2021)

Accordion Panel and cabinet Assembly

1.Hold the Accordion Panel in one hand and gently

pull the center to free the open end.

2.Slide the free end of the panel into the cabinet as

shown. Be sure to leave enough space to slip the

top and bottom of the frame into the rails on the

cabinet.

3.Once the panel has been installed on the side of

the cabinet, make sure it sits securely inside the

frame channel by making slight adjustments. Slide

the top and bottom ends of the frame into the top

and bottom rails of the cabinet. Slide the panel all

the way for both sides.

OFFSET

STOOL

SILL

INTERIOR

WALL

EXTERIOR

WALL

Air conditioner

Bottom channel

4.Use two or more people, place the air conditioner

into the window opening so the bottom of the air

conditioner frame is against the window sill.

Tilt the back of the unit slightly download to allow

accumulated rain water to drain out.

5.Fasten cabinet bottom to window sill using two

1/2” screws. Pre-drill holes if needed.