Instruction Manual

BACK PANEL
SEND JACK: This is where you plug the INPUT of your Effect(s). Use a high-quality shielded guitar cable.
RETURN JACK: This is where you plug the OUT of your Effect(s). Use a high-quality shielded guitar cable.
4 OHM SPEAKER OUT JACKS (2): Plug in ONE 4 OHM cabinet or TWO 8 OHM cabs here.
8 OHM SPEAKER OUT JACKS (2): Plug in ONE 8-ohm cab or TWO 16-ohm cabs here.
16 OHM SPEAKER OUT JACK: Plug in ONE 16-ohm speaker cab here.
MAIN FUSE: This fuse is in the compartment found below the AC receptacle. Replace with the
appropriate fuse as marked on the back panel. If this fuse blows, it is probably the result of a bad tube.
Constant blowing of this fuse (even when using new tubes) is an indication that something could be
seriously wrong with your amp. STOP and call us so we may help you diagnose.
MAINS INPUT: Plug the supplied IEC power cord here.