Instruction Manual

FRONT PANEL
POWER SWITCH: Turn this ON for about one minute before playing for maximum tube life. This is a
lighted switch to provide a gentle reminder to let you know your amp is ON.
BASS CONTROL: This adds or takes away bass or bottom end. As the amp gets louder you may want to
back this off a bit. Start at 7-10 for bedroom volumes.
MIDDLE CONTROL: Adds or takes away midrange. Start at 5 or 6, lower settings will scoop the mids,
higher levels will allow your audience to actually hear the guitar in the mix.
SAT SWITCH: Primarily designed to add gain, compression and saturation. This is a heavier tone.
It is normal for the volume level to drop with this switch engaged. Compensate with the amp’s
Master volume.
TREBLE CONTROL: This adds or takes away treble. Start at 5 and adjust to taste.
MASTER CONTROL: This is the MASTER VOLUME. The more you turn it up the louder it gets.
S: Gain structure switch provides three choices of overall gain of the Pink Taco V2.
GAIN CONTROL: This adds gain/distortion. Adjust to taste. Don’t be afraid.
FAT: Adds bottom end for a fatter tone.
INPUT: Just like it says. This is the Pink Taco V2 Guitar Input Jack. This is where you insert your guitar
cable if you want to hear the darn thing.