Instruction Manual

REAR PANEL
SEND JACK: This is where you plug the INPUT of your Effect(s). Use a high quality shielded guitar cable.
RETURN JACK: This is where you plug the OUT of your Effect(s). Use a high quality shielded guitar cable.
SPEAKER OUT JACKS (2): Plug in your speaker cab(s) here. Use Speaker cable ONLY.
IMPEDANCE SELECTOR SWITCH: Select the correct speaker cab impedance with this selector switch.
MAIN FUSE: This fuse is in the compartment found below the AC receptacle. Replace with a 3 Amp slo
blow fuse for 120V or 1.5 Amp slo blow for 230V. This most likely is the result of a bad tube. Constant
blowing of this fuse (even when using new tubes) is an indication that something could be seriously
wrong with your amp. STOP and call us so we may help you diagnose.
HT FUSE: Replace with a 1 Amp fuse for 120V or a 500ma fuse for 230v. If this blows it is likely a bad
power tube as well.