MC55264A MC55264AS MC55264AB
Contents Safety and warning information_ _ _ _ _ 2 Using your appliance _ _ _ _ _ _ _ _ _ _ 14 Installing your new appliance_ _ _ _ _ _ 8 Reversing the door _ _ _ _ _ _ _ _ _ _ _ 9 Description of the appliance _ _ _ _ _ _12 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ 15 Cleaning and care _ _ _ _ _ _ _ _ _ _ _ 16 Operation_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13 Disposal of the appliance_ _ _ _ _ _ _ _ 19 Troubleshooting_ _ _ _ _ _ _ _ _ _ _ _ _18 For your safety and correct usage, before installing and f
Keep all packaging away from children as there is risk of suffocation. If you are discarding the appliance, pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent children playing from suffering an electric shock or from closing themselves inside it.
WARNING — The refrigerant and insulation blowing gas are flammable. When disposing of the appliance, do so only at an authorized waste disposal centre. Do not expose to flame. WARNING —When positioning the appliance, ensure the supply cord is not trapped or damaged. WARNING —Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a shortcircuit, fire, and/or electric shock. Electrical safety 1.The power cord must not be lengthened. 2. Make sure that the power plug is not crushed or damaged. A crushed or damaged power plug may overheat and cause a fire. 3. Make sure that you can access the main plug of the appliance. 4. Do not pull the main cable. 5. If the power plug socket is loose, do not insert the power plug.
Do not place food products directly against the air outlet on the rear wall. Store pre-packed frozen food in accordance with the frozen food manufacture’s instructions. The appliances manufactures storage recommendations should be strictly adhered to.Refer to relrelevant instructions for storage. Do not place carbonated or fizzy drinks in the freeze compartment as it creates pressure on the container,which may cause it to explode,resulting in damage to the appliance.
Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket. Do not clean the appliance with metal objects, steam cleaner, ethereal oils, organic solvents or abrasive cleansers. Do not use sharp objects to remove frost from the appliance. Use a plastic scraper. Installation Important! For electrical connection carefully, follow the instructions given in this manual. Unpack the appliance and check if there are damages on it.
Installing your new appliance Before using the appliance for the first time, you should review the following tips. Ventilation of appliance In order to improve efficiency of the cooling system and save energy, it is necessary to maintain good ventilation around the appliance. For this reason, sufficient clear space should be available around the refrigerator.
Reversing the the door door Reversing The side at which the door opens can be changed, from the right side (as supplied) to the left side, if trequired. Warning! When reversing the door, the appliance must not be connected to the mains. Ensure that the plug is removed from the mains socket. Tools you will need 8mm socket wrench Cross-shaped screwdriver 2.
8. Place the lower door on a smooth surface with its panel upwards. Loose screw ② and part ①, then Install them to the left side and tighten securely. ① Stop block ② Self-tapping screw 6. Place the upper door on a smooth surface with its panel upwards. Loose screw ② and part ①, then Install them to the left side and tighten securely. ① ② ① Stop block ② Self-tapping screw ① ② 9. Change screw hole covers on middle cover plate from left to right (as shown in figure below). screw hole covers 7.
11. Unscrew the bottom hinge axis and remove it to the hole which is side by side and screw it. middle hinge part selftapping screws washer 15. Transfer the upper door to the appropriate position. Secure the door’s level, make the middle hinge axis into the lower hole of the upper door. Note: washer may stick to lower door 12.Replace the lower hinge part to the left side and fixing it with the special flange self-tapping screws.
upper hinge cover (left) screw hole cover 18. Open the upper door and install the door shelves, then close it. Warning! When changing the side at which the door opens, the appliance must not be connected to the mains. Remove plug from the mains beforehand. Description of the appliance View of the appliance 1. Controller box and LED light 2. Door switch 3. Shelf 4. Crisper box cover 5. Crisper drawer 6. Freezer upper drawer 7. Freezer lower drawer 8. Adjustable bottom feet 9.
Operation Starting up and temperature regulation Changing the light bulb Insert the plug of the connection lead into the plug socket with protective earth contact. When the refrigerator compartment door is opened, the internal lighting is switched on. After the fridge has been placed in position, wait for 5 minutes before electricity is supplied. Don’t store anything until the temperature inside the fridge becomes low enough.
Using your appliance Accessories 1) Movable shelves/trays Various glass, plastic storage shelves or wire trays are included with your appliance-different models have different combinations and different models have different features. The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. Positioning the door shelves To permit the storage of food packages of various sizes, the door shelves can be placed at different heights.
Helpful hints and tips Energy saving tips ●We recommend that you follow the tips below to save energy. ●Try to avoid keeping the door open for long periods. ●Ensure the appliance is away from any sources of heat (Direct sunlight, electric oven or cooker etc). ●Don't set the temperature colder than necessary. ●Don't store warm food or evaporating liquid in the appliance. ●Place the appliance in a well ventilated, humidity free, room. Please refer to Installing your new appliance chapter.
Cleaning and care For hygienic reasons the appliance (including exterior and interior accessories) should be cleaned regularly (at least every two months). Caution! The appliance must not be connected to the mains during cleaning as there is a danger of electrical shock. Danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains socket. Exterior cleaning -Wipe the control panel with a clean, soft cloth.
Defrosting in frozen-food storage compartment Defrosting in freezer chamber is operated manually. Before defrosting, take the food out. Take the ice tray and food in drawers out or put them into the fresh food compartment temporarily. Set the knob of the temperature regulator to position “0”(where the compressor will stop working) and leave the door of the refrigerator open until ice and frost dissolve thoroughly and accumulation at the bottom of the freezer chamber. Wipe off the water with soft cloth.
Troubleshooting If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below. You can carry out some easy checks according to this section before calling for service. Warning! Don't try to repair the appliance yourself.
Ensure food is placed within the appliance to allow sufficient A layer of frost occurs inventilation. Ensure that door is fully closed. To remove the the compartment frost, please refer to cleaning and care chapter. You may have left the doors open too long or too frequently; or the doors are kept open by some obstacle; or the appliance is located with insufficient clearance at the sides, back and top Temperature inside is Increase the temperature by following the "Display controls” too cold chapter.
Hisense UK Limited Unit 2,Meadow Court,Millshaw, Leeds LS118LZ For service and repairs please contact the Fridgemaster Technical Helpline on:
