User Manual

Using your appliance
Before using
Before using this appliance for the first
time, you should use it
.
1. Hold the two sides of the water tank
tightly, then pull up the water tank by
shaking up and down.
2. Unscrew the head, then clean it and the
inside of water tank.
based on following
instructions
●
Assembling
Before assembling, please drain the water
1.Insert the head into the hole.
2.Fit the tank along the guides on the
door.
3.Press down on the two side of the tank.
4.When you hear a click sound, that
means the installation is completed.
●
Warning!
1.Be careful not to press on the head.
2.When fitting the water tank, ensure the
head inserted into the hole first.
①
②
dispenser part
Slot
Guide
① ②
③
④
Filling water
1. Open the water supply inlet cover from
the left side.
2.Fill the water.
Caution!
Fill with water up to 2.5L (which is
suggested), and not above the level.
Otherwise, it may overflow when the lid is
close.
Other beverage(milk,juice,carbonated
beverage etc) is not suggested to be
used than potable water .Especially
beverage including grain must not be
used (may result in failure).
Hot water can not be filled into the water
tank directly.
●
●
●
Warning!
Don't touch other parts of the appliance
when filling water, it may cause the water
leakage.
Receiving Water
You should use the correct cups to
receive water underneath the water
dispenser.
Dispenser lever
Suggested position
inside the tank.
14