Installation Instructions WHAT YOU WILL NEED: INCLUDED: • • • 1 FRESH AIR SCREEN 1 ROLL OF SELF-ADHESIVE LOOP STRIP 1 CLEAT NOT INCLUDED: • • • • HAMMER STEP LADDER 5/8" ROOFING NAILS (OPTIONAL) 3/4" PIPE (PVC RECOMMENDED) CUT TO THE WIDTH OF THE SCREEN (STEP 5)
Fresh Air Screens are mounted to the frame using a hook and loop (i.e., Velcro) system. For best results, clean any dirt and debris off the frame before applying the adhesive loop strip and allow to dry thoroughly. These instructions are a guide for mounting screens without or prior to adding a rope and pull kit. To add a rope and pull kit, please see Installation Instructions for Rope and Pull Kits. STEP 1 Measure the height of the door jambs and the length of the header.
