APCO Spec Sheet

WWW.FRESHAIREUV.COM
APCO® ulizes proprietary UV-reacve carbon cells to disinfect the
air and neutralize odors and volale organic compounds (VOCs)
in the indoor air. The system uses specially prepared adsorpon
media to capture VOCs, then, with the help of a 254 nm germicidal
UV-C lamp, the captured constuents are neutralized through
an innovave reacon process which breaks them down into
elemental carbon dioxide and water vapor.
The monolithic carbon cells in APCO® are regenerave.
Under normal operaon it requires no maintenance
and does not need to be replaced. Addionally, the
UV-C light in APCO® disinfects the moving air stream
reducing airborne mold, bacteria, and viruses. The UV
light also reduces any build up of mold within the air
handler and ducts.
APCO TECHNICAL DATA
UV Lamp 254 nm Germicidal UV-C Spectrum Quartz Hot Filament
Carbon Cell Advanced Monolithic Adsorptive Carbon cell with proprietary
absorption media and proven TiO2 photo-catalyst
Cell per In2 16
Cell Surface Area 250 m2/gm
Bulk Density 1.44 gm/cm2
Pressure Drop <0.01” w.c. @ 400 FPM
VOC Activity 40-60% absorption per pass
Max Operating Temp. 400 degrees F
TECHNICAL DATA
Odors 492 fpm
Bacteria
Mold
APCO Carbon % Reduction of Common
Indoor Air Contaminants Over 4 Hours
100
80
60
40
20
0
0 1 2 3 4
Hours
% Initial Concentration
APCO
ORIGINAL RT & MAG