Specification

CARTRIDGE
RETAINING
NUT
CARTRIDGE
COVER
HANDLE
ALLEN
KEY
GRUB
SCREW
CAP
FAUCET
2
To remove the cartridge.
First shut off the water supply to the tap.
1: Pull out the cap from the handle.
2: Loosen the grub screw in handle, but do not remove it.
3: Take off the handle, unscrew the cartridge cover.
4: Unscrew the retaining nut.
5: Pull the cartridge and wash it with clean running water.
6: Dry and lightly grease the seals (only use silicone grease)
Dimensions
Installation
Unit:inches
7.1″
4.6″
4.4″
2.0″
max1.1″
Faucet
Supply Lines
Thread Pipe
Washer
Fixing Nut
1: Twist supply lines into the faucet.Put washer into the groove of faucet.
2: Pass supply lines and thread pipe through the countertop hole,and twist the fixing nut to the thread pipe. Adjust the faucet and tighten
firmly.