Specification

2
To remove the cartridge.
First shut off the water supply to the tap.
1: Pull out the cap from the handle.
2: Loosen the grub screw in handle, but do not remove it.
3: Take off the handle, unscrew the cartridge cover.
4: Unscrew the retaining nut.
5: Pull the cartridge and wash it with clean running water.
6: Dry and lightly grease the seals (only use silicone grease)
Dimensions
Installatio
1: Twist supply lines into the faucet.Put o-ring into the groove of faucet.
2: Pass supply lines and thread pipe through the countertop hole,and twist the fixing nut to the thread pipe. Adjust the faucet and tighten
firmly.
Unit:inches
n
11.2″
8.7″
1.8″
max1.1″
6.6″
Faucet
Supply Lines
Thread Pipe
O-ring
Fixing Nut
CARTRIDGE
RETAINING
NUT
CARTRIDGE
COVER
HANDLE
ALLEN
KEY
GRUB
SCREW
CAP
FAUCET