FVN2460 WINDSOR INSTALLATION GUIDE TOOLS FOR ASSEMBLY /4" & 3787 Drill] Bit MIRROR INSTALLATION E] Press the anchors Into the holes. s Measure distance between the holes and mark it on the wall using a level. Verify level and mark the mounting holes. ] Hang mirror on the screws. L IMPORTANT: Conduit an expert for the proper thunderbolts to use when attaching to various constructions. Screws provided do not attach 1o all wall construction types, Anchors are not required if brackets are installed in stud.
FVN2460 WINDSOR INSTALLATION GUIDE CABINET INSTALLATION E] Mark anchor mounting hole locations on the wall as shown. IMPORTANT: Consult an expert Tor the proper screws/Dolts to use when attaching to various constructions. Screws provided do not attach to all wall construction types. Anchors are not required if brackets are installed in stud, Flip counter top upside down and attach 4 I Apply silicone to the top of the cabinet sink to It using provided brackets & screws.
FVN2460 WINDSOR INSTALLATION GUIDE SINK o Your tern may POP-UP appear slightly different from the illustration. o 7 SILICONE WASHER SILICONE WASHER 2 €3, MOUNTING RING 5 Q\B BRASS NUT RING RUBBER WASHER DRAIN PIPE TAIL_ PIPE MOUNTING RING 2 RUBBER WASHER 2 RUBBER WASHER P-TRAP CLEAN QUT PLUG RUBBER WASHER 3 POP-UP INSTALLATION INSTRUCTIONS FOR SINKS Eeizdsl e WITHOUT OVERFLOW WITH OVERFLOW © FVN2460 \WINDSOR | INSTALLATION GUIDE S8 FRESCA™ Al rights reserved, This malted may rot be reproached, displayed, co
