| © FRESCO -3030 oot FVN20 front view Xz ENSEMBLE ) FVN20-3030 OXFORD | INSTALLATION GUIDE be reproduced, displayed, modified or distributed without the
COUNTER TOP & BACK SPLASH DIMENSIONS &7 o) T 1/8° Dl bie MIRROR INSTALLATION @ Level the mirror bracket and @ Drill the installation holes © Insert the plastic plug then mark the installation position FVN20-3030 OXFORD INSTALLATION GUIDE PAGE 2 92017 FRESCA™ All rights reserved.
O Connect the bracket © Hang the mirror on the bracket. to the mirror with the screws. DRAWER REMOVAL & INSTALLATION REMOVAL INSTALLATION ) FVN20-3030 OXFORD | INSTALLATION GUIDE PAGE 3 92017 FRESCA™ All rights reserved.
1 Level the cabinet and mark position 2 Drill the holes previously marked. for the installation. To ensure stability, cabinet’s height can be regulated by turning the glide clockwise or counterclockwise. {Optional Step} 3 “Insert the anchors into the holes ll' *Connect the cabinet to the wall using screws *NOTE: Only use anchors if stud is not available. @, & wr Consult an expert for the _~ proper screws/bolts to use when attaching to various wall constructions.
Make sure that both cabinets are Flip the counterpart upside down and aligned and securely installed. attach the sink to it using a provided brackets & screws. Apply silicone to the top of the cabinet and place the counter top with sink attached on it ) FVN20-3030 OXFORD | INSTALLATION GUIDE 92017 FRESCA™ All rights reserved.
POP-UP & P-TRAP INSTALLATION INSTRUCTIONS Your inert may appear slightly different from the illustration. Silicone Washer 2 & Mounting Ring O'\E Brass Nut Ring Rubber Washer Drain Pipe Tail Pipe Mounting Ring 2 Rubber Washer 2 Rubber Washer & {) p-Trap Clean Out Plug Rubber Washer 3 POP-UP INSTALLATION FOR SINKS [Hel SN WITHOUT OVERFLOW WITH OVERFLOW ) FVN20-3030 OXFORD | INSTALLATION GUIDE PAGE 6 92017 FRESCA™ All rights reserved.
P-TRAP INSTALLATION § | install tail pipe (8). 2 | install P-trap ¢8). ) FVN20-3030 OXFORD | INSTALLATION GUIDE PAGE 7 92017 FRESCA™ All rights reserved.
