Use and Care Manual

Install the Body:
1. Move the machine with installed heat pipe and fittings before the window. The distance
between the body and walls or other objects shall be least 19 inches.
Figure 4
2. Elongate the exhaust pipe and snap the flat end of the exhaust pipe joints into the hole
of the window sealing plate assembly (as shown in Figure 5 and Figure 6).
• Notes:
o
The flat end of the exhaust pipe joints must be snapped into place.
o
The pipe cannot be distorted nor has substantial turning (greater than
45 °). Keep the ventilation of the exhaust pipe not blocked.
Figure 5 Figure 6
Important Notice: The length of the exhaust hose shall be 11-59 inches, and this length is based on the
specifications of the air conditioner. Do not use extension tubes or replace it with other different hoses,
or this may cause a malfunction. Exhaust host must be not blocked; otherwise it may cause
overheating.
9