Use and Care Manual

Installation of Window Sealing Plate Components:

1. Half open the window and mount the window sealing plate assembly to the

window (as shown in Figure 2 and Figure 3). Components can be placed in

horizontal and vertical direction.

2. Pull various components of the window sealing plate assembly open, adjust

their opening distance to bring both ends of the assembly into contact with the

window frame, and fix various components of the assembly.

3. Install the window sealing plate assembly



Notes:

• The flat end of the exhaust pipe joints must be snapped into place.

• The pipe cannot be distorted nor has substantial turning (greater

than 45 °).

• Keep the ventilation of the exhaust pipe not blocked.

Figure 2 Figure 3