Use and Care Manual

Remote Control Operation Instructions:
Power: Press
to turn on or turn off the machine.
Mode: Press to switch between cooling, air supply,
dehumidification and heating mode.
Up: Press to increase temperature and timing set value.
Down: Press to reduce temperature and timing set value.
Fan: Press to select high, medium and low wind speed
output circularly.
Timer: Press to set timing value.
Swing: Press to fix the louver in your desired position.
Press to switch between Celsius and Fahrenheit.
Sleep: Press to turn on the sleep mode.
• Frost Protection Function: In cooling mode, if the temperature of the exhaust pipe is too low,
the machine will automatically enter protection status; if the temperature of the exhaust pipe
rises to a certain temperature, it can automatically revert to normal operation.
• Overflow Protection Function: When water in the water pan exceeds the warning level, the
machine will automatically sound an alarm, and the "FULL" indicator light will flash. At this point,
you need to move the drainage pipe connecting the machine or the water outlet to sewer or
other drainage area to empty the water (details see Drainage Instructions at the end of this
chapter). After the water is emptied, the machine will automatically return to the original state.
• Automatic Defrosting (cooling models have this function): The machine has automatic
defrosting function. Defrosting can be achieved through four - way valve reversing.
• Protection Function of the Compressor: To increase the service life of the compressor, it has
a 3-minute delay booting protection function after the compressor is turned off.
Protection Functions
6