• • • USER MANUAL Portable Air Conditioner FHCP101AKR FHCP101HKR • • • • www.FREONIC.com Questions? We're here to help! Contact us: 1-888-984-2755 or Comfort@Freonic.
Welcome to the Freonic Family! Your life just got COOLER! Thank you for purchasing one of our innovative home climate products! We know that you will be thrilled by the features and functionality. If, for an reason, you are not completely satisfied, have a general question, or need further guidance on installation, please reach out to the Freonic customer service team at 888-984-2755 or Comfort@Freonic.com.
Notes • The air conditioner is only suitable for indoor use, and is not suitable for other applications. • Follow local grid interconnection rules while installing the air conditioner and ensure that it is properly grounded. If you have any question on electrical installation, follow the instructions of the manufacturer, and if necessary, ask a professional electrician to install it.
Components Exhaust Pipe Assembly Window Sealing Plate Assembly 4
Control Setting Operation Interface: 1) SWING: The louver on the portable air conditioner will open automatically, Press the auto swing button to fix the louver in your desired position. 2) TIMER: Press TIMER button to set the unit automatically turn ON or OFF. Use the + and buttons to program the hour increment. 3) FAN SPEED: In cooling, heating and fan mode, pressing the key to select high, middle, low fan speed. This function is not available in SLEEP mode and DEHUMIDIFYING mode.
Remote Control Operation Instructions: Power: Press to turn on or turn off the machine. Mode: Press to switch between cooling, air supply, dehumidification and heating mode. Up: Press to increase temperature and timing set value. Down: Press to reduce temperature and timing set value. Fan: Press output circularly. to select high, medium and low wind speed Timer: Press to set timing value. Swing: Press to fix the louver in your desired position.
Installation and adjustment Installation Warning: before using the mobile air conditioner, keep it upright for at least two hours. The air conditioner can be easily moved in the room. In the moving process, ensure that the air conditioner is in the upright position and the air conditioner should be placed on a flat surface. Do not install and use the air conditioner in the bathroom or other humid environments. Install the heat pipe (as shown in Figure 1): Figure 1 1.
Installation of Window Sealing Plate Components: 1. Half open the window and mount the window sealing plate assembly to the window (as shown in Figure 2 and Figure 3). Components can be placed in horizontal and vertical direction. 2. Pull various components of the window sealing plate assembly open, adjust their opening distance to bring both ends of the assembly into contact with the window frame, and fix various components of the assembly. 3.
Install the Body: 1. Move the machine with installed heat pipe and fittings before the window. The distance between the body and walls or other objects shall be least 19 inches. Figure 4 2. Elongate the exhaust pipe and snap the flat end of the exhaust pipe joints into the hole of the window sealing plate assembly (as shown in Figure 5 and Figure 6). • Notes: o The flat end of the exhaust pipe joints must be snapped into place.
Drainage Instructions This machine has two drainage methods: manual drainage and continuous drainage. 1. Manual Drainage: a. When the machine stops after the water is full, turn off the machine power and unplug the power plug. i. Notes: 1. Please move the machine carefully, so as not to spill the water in the water pan at the bottom of the body. b. Place the water container below the side water outlet behind the body. c. Unplug the water plug, the water will automatically flow into the water container. i.
Maintenance Cleaning: before cleaning and maintenance, turn off the machine and unplug the plug. 1.Clean the surface: Clean with surface of machine with a wet soft cloth. Don't use chemicals, such as benzene, alcohol, gasoline, etc; otherwise, the surface of the air conditioner will be damaged or even the whole machine will be damaged.
Unit Storage 1) Unscrew the drainage cover, unplug the water plug, and discharge the water in the water pan into other water containers or directly tilt the body to discharge the water into other containers. 2) Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state until the drainage pipe becomes dry, so as to keep the inside of the body in a dry state and prevent it from mildewing.
Troubleshooting Do not repair or disassemble the air conditioner by yourself. Unqualified repair will lead to failure of the warranty card, and may cause damage to you or your property. Problems Reasons There is no electricity. The air conditioner does not work. The overflow indicator displays "FL". The ambient temperature is too low or too high In cooling mode, the room temperature is lower than the set temperature; in heating mode, the room temperature is higher than the set temperature.