Installation Guide

 Page 12
FUNCTIONALITY AND FEATURES
If the air conditioner turns o unexpectedly due
to loss of power, it will restart automatically with
the previously set functions when power is
restored.
If frost builds up on the evaporator coils, the unit
will enter Auto Defrost mode. The compressor will
cycle off and the fan will continue to run until the
frost disappears.
Press the ENERGY SAVER button on the remote
control to activate Energy Saver mode. This function
allows the fan to run for 3 minutes after the
compressor turns off at your desired set temperature.
The fan will then cycle on every 10 minutes for 2
minutes to maintain the set temperature. If the room
temperature rises, the compressor will turn back on
and cooling will resume
Press the SHORTCUT button on your remote control
to set the air conditioner to all of your favorite
settings with the touch of one button.
Press the TIMER button pm the unit or the remote
control to select Timer ON or Timer OFF. Press the UP
or DOWN button to change the length of time before
the unit will turn ON or the length of time until the
unit will turn OFF. Pressing the TIMER button again
will cancel the set timer.
Louvers are manually adjustable Left/Right and Up/
Down. Use the levers to push the air direction left or
right. Push on the louver to adjust the angle up or
down.
NOTE: One the unit is turned off, opertaion
cannot be restarted for 3 minutes.
Press POWER button on unit or remote
control to turn unit on or off. The unit will start
automatically in Cool mode with Energy Saver
functionality active.
Press MODE button on unit or remote control to
switch between Cool, Fan, Dry, and Auto modes.
After 250 hours of operation, the filter indicator
light illuminates. This feature is a reminder to
clean the Air Filter for more efficient operation.
Press the FILTER button for 3 seconds to cancel
the reminder.
Press + / - UP/DOWN buttons on unit or remote
control to change temperature setting under
cool mode. The set temperature will be
automatically maintained anywhere between
62°F (17°C) and 86°F (30°C).
On fan mode,the display will show the actual
room temperature.
NOTE: Press and hold + and - buttons together
for 3 seconds will alternate the temperature
display between the °C & °F scale.
Press the FAN SPEED button on the unit or
remote control to select between Low, Medium,
High, or Auto fan speeds.
Press the SLEEP button on the unit or remote
control to activate Sleep Mode. Sleep Mode
allows the air conditioner to slowly raise the
temperature of your room overnight to conserve
energy.
Press the TIMER ON button on the remote
control to set a specific time for the unit to come
on. Press the TIMER OFF button on the remote
control to set a specific time for the unit to turn
o.
Air Conditioner
Features
Levers