Operating and Maintenance Manual

9
2 OPERATING THE BOOST CHARGER
Step 9 Return the cable to the charging station holster.
Step 10 Tap ‘Exit’ to return to the home screen.
Note: The driver may select to plug in the vehicle first, then initiate charging on the screen. This is also
supported by the Boost Charger (Plug, Pay, Go).
2.6 LED Status Indicators
The LED Status Indicators will change depending on availability and/or status of the charger.
• Solid Green - Available for charging.
• Blinking Green - Charging session initiating.
• Red - Out of order or unavailable for charging.
• Status Level Indicator - There are two sets of LEDs per side of the unit. During charging sessions, the top
set of LED lights will fill from bottom to top to indicate the vehicle’s state of charge (SOC). The fuller the
bar, the fuller the EV’s SOC.