User Manual

(KM3x8mm 4pcs)
Inst all Ma in wing
P NP Assemb ly Instructions
F/A-18C Hornet
3
Step1
Step2
Step3
A
C
B
A-Horizontal Stabilizer
B-horizontal tail shaft
C-Screw
A-Carbon tube
B-Ribbon wire
C-Controller Module
D-Screw
As the photo show:
1. Insert the carbon tube to the fuselage.
2. Insert the ribbon wire to the main wing control board and install left/right wing on the fuselage.
3. Use screws to fix the main wing.
As the photo show:
1.Insert the left/right horizontal stabilizer to the shaft of tail fuselage, and use 4 pcs screws to fix.
2.Adjust the pushrod length to the correct position.
As the photo show: Use glue to attach the plastic cover on the indicated position.
the plastic cover
B
C
A
7mm
Step2
A
D
Step1
（ 10x480mm 1pcs）
（PWM3x6mm 4pcs）
Item No : FJ314-V01
Install Horizontal Sabilizer