User Manual

4
Main wing servos wire
Landing gear wire
Screws (PM3x6 4pcs)
E
SC
A-Tail fuselage
B-
Screws (KA2.6x8 4pcs)
A
B
MIG-21MF FISHBED
Item No.:F J210
Screw
(FA3x8mm)
PNP Assembly Instructions
6.Use glue and screw to secure the intake plate.
3.Use 4 screws to secure the main wing.
4.Use the steel wire to pull the left and right wing connection wires to the battery compartment.
5.Use plastic cover to close the main wing connection cable
trough on the inner wall.
Battery co
mpar
tme
nt
1. Place the elevator onto the tail of the fuselage
2. Use 2 screws to
secure the elevator
3. Repeat the above steps to install the other
elevator.
Elevator and Rudder Installation
Elevator Installation