User Manual
Power System
A
ssem
b
ly an
d
Installat
i
on
1.
lnstall the "motor (D)" inside the "ducted fan housing (C)".
2.
Secure the motor with 4 "cup head screws (B)".
3.
Put the "rotor (E)" on the motor shaft.
( During this process, please note the hardware platform of rotor should be alignment with the motor shaft platform)
4.
Use "spinner (F)" to cover the rotor, and secure the "spinner (F)" with
a "cup-head-screw (G)".
5.
Install the "tail air-deflector (A)" to the "bottom of the ducted fan housing (C)", and use "Grub screws (H)" to secure.
Note: When the battery and ESC are
connected, do not touch them to avoid
accidental serious injury. Use a safety
test stand while testing. Do not place your
hands near the unit!
Motor Parameters
MOJ35301
For 6S Battery
Upgrade
Version
Super Scorpion
-9-
_
I
I
I
/.
H