User Manual
P
ower system Installat
i
on
1.
Put the motor (D) in the ducted fan housing (C).
2.
Secure the motor with 4 cup head screws (B).
3.
Put the rotor (E) in the motor shaft.
( During this process, please note the hardware platform of rotor should be in alignment with the motor shaft platform)
4.
Use spinner (F) to cover the rotor, and secure the spinner (F) with a cup-head-screw (G).
5.
Install the tail air-deflector (A) to the bottom of ducted fan housing (C), and use 2 Grub screws (H) to secure it.
6.
Connect the motor and ESC.
7.
Put the assembled EDF (I) into the fuselage.
8.
Use 4 screws (K) to secure the EDF (I) to the wood base.
PWA3*8mm
•
J-
-�
·
Motor parameters
MOJ35251
For 45 Battery
Standard
Version
MOJ35301
For 65 Battery
Upgrade
Version
-
0 0
M
(A)
10
28
N
10
28
A
I
I
I
/.
H M3*3
&
Note:
Once the ESC is connected to a
battery, do not touch them with your
hands to avoid possible injury. Use a test
stand and do not touch the ESC/motor
while testing.
N
2870RPM/V
1750RPM/V
F-86 Sabre