User Manual

13. Apply 5-minute epoxy to the nose cone and attach it to the fuselage. Ensure it is aligned properly.
14.
The
hatch has magnets at the front and a tab at the back. Lift
the
hatch from the front and sl
ide it
forward to remove it. Install your receiver using double sided tape or Velcro.
F9F Panther
Item No.:F1701
-5-
Use a radio or servo tester to center the servo.
Slide the elevator pushrods through the tubes and attach the clevis' to the control horns.
Slide the control rods through the servo control arm. Center the elevator and lock the servo control
arm down on the control rod by tightening the control arm screw.
12.