User Manual
Servo Introduction
A
servo or reversed servo is defined as follows:
When the servo input signal changes from 1000
ų
s to
2000
ų
s, if the servo arm rotates cloc
k
wise, it
'
s a
positive
servo
.
I
f it rotates counter cloc
k
wise, it
'
s a
reversed servo.
Note: If you choose not to use the factory servo, the
servo you choose may be larger. Refer to the
following list to ensure that the servo you chose will
fit.
Nose gear door servo(F)
Nose gear door servo(R)
Nose gear steering servo
Main gear door servo
Reversed
Rear cabin door servo
Flap
Flap
Reversed
Aileron
8
Aileron
Air-brake
Air-brake
Reversed
Elevator
Elevator
Reversed
Rudder
Battery Installation
B
attery hatch
Before proceeding, turn on the radio and ensure
that the throttle is in the lowest position. Engage
the kill switch if one is assigned
-
-10-
EN
T
Battery Bay
Remove the battery hatch by pulling the tab up.
Insert a fully charged battery onto the hatch deck.
Secure it by wrapping the Velcro strap around it.
A variation in battery weights will affect the CG. If
you are trying a different size of battery, recheck
your CG to ensure you have the battery in the
correct position.